IHTH-1500MZ-5A
www.vishay.com
Vishay Dale
High Current Through-Hole Inductor, High Temperature
FEATURES
• Shielded construction
• High temperature, up to +155 °C
• Excellent DC/DC energy storage up to 2 MHz
• Filter inductor applications up to SRF (see
“Standard Electrical Specifications” table)
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite
construction
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
APPLICATIONS
L0
SATURATION
CURRENT
DC TYP.
(A)
• 48 V to 12 V input / output filters
• Diesel injection drivers
INDUCTANCE
ꢀ0 ꢁ
HEAT
DCR DCR RATING
AT 100 kHz, TYP. MAX. CURRENT
0.ꢀ5 V, 0 A
(μH)
SRF
TYP.
• Noise suppression for motors
ꢀ5 °C ꢀ5 °C DC TYP.
(ꢀ)
(3)
(mΩ) (mΩ)
(A) (1)
134.8
81.7
(MHz)
0.47
2.2
0.19
0.51
1.13
0.20
0.54
1.19
109.4 156.2 54.1
78.9 111.4 14.7
DIMENSIONS in inches
Ø 1.500 0.005
[38.100 0.127]
4.7
60.6
60.0
90.1
9.2
Notes
0.502
[12.75]
•
•
•
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +155 °C
The part temperature (ambient + temp. rise) should not exceed
155 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application
0.375 0.015
[9.53 0.38]
0.050 0.005
[1.270 0.127]
(1)
(2)
(3)
DC current (A) that will cause an approximate ΔT of 40 °C
DC current (A) that will cause L0 to drop approximately 20 %
DC current (A) that will cause L0 to drop approximately 30 %
0.600
[15.24]
C
D
A
Ø 0.098
[2.50]
0.750
[19.05]
B
Vibration support leads
do not ground
Dimensions are 0.010 [ 0.254] unless otherwise noted
VALUE D
A
B
C
0.47 μH 0.626 [15.9] 0.499 [12.67] 0.142 [3.61] 0.375 [9.53]
2.2 μH 0.753 [19.13] 0.436 [11.07] 0.142 [3.61] 0.311 [7.9]
2.7 μH 0.731 [18.57] 0.459 [11.66] 0.160 [4.06] 0.310 [7.87]
4.7 μH 0.865 [21.97] 0.367 [9.32] 0.113 [2.87] 0.268 [6.81]
Revision: 03-Dec-2021
Document Number: 34570
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000