IHPT-1411AF-ABA
Vishay Custom Magnetics
www.vishay.com
Haptic Feedback Actuator
FEATURES
• Solenoid construction provides high impulse
vibration for clear tactile feedback in noisy
environments
• This IHPT device can drive up to a 0.5 kg load
to 6 g’s of acceleration with a 12 V, 5 ms pulse
using Vishay’s spring return test fixture
• Standard lead termination is dipped 100 % tin
solder; customer specific connectors available
upon request
• Compact, two piece construction with mounting holes;
stationary “U” core and moving “I-bar” for easy
implementation in touch screen or touch button
application
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive dashboards, touch screens, and center
consoles
LINKS TO ADDITIONAL RESOURCES
• Physical feedback for electronic shift transmissions,
steering wheels, seats, control panels
3
D
Product Page
3D Models
• Touch screens for human-machine interfaces
STANDARD ELECTRICAL SPECIFICATIONS
RESPONSE
L0 INDUCTANCE
DCR
TYP.
(Ω)
DCR
MAX.
(Ω)
DIELECTRIC WITHSTAND
VOLTAGE COIL TO CORE
FORCE
TIME
TYP.
(ms)
ꢀ0 ꢁ AT 1 kHz,
0.ꢀ5 V, 0 A
(mH)
PART NUMBER
COEFFICIENT (1)
(VDC
)
IHPT1411AFEBR73ABA
0.73
5.0
1.8
0.95
1.09
150
Notes
•
•
•
All specifications are referenced to 25 °C ambient, and assume a 0.75 mm (0.030") gap
Operating temperature range -40 °C to +105 °C
The part temperature (ambient + temp. rise) should not exceed 105 °C under worst case operating conditions. Circuit design, component
placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application
•
(1)
Rated voltage: 16 V maximum
Applied force, in newtons, can be estimated by the following equation: F = FORCE COEFFICIENT x IPK
2
MATERIAL
Core
SOLDER COMPOSITION
Sn
Laminated steel
Copper, PU/PA insulated
Hot dip tin
99.3 %
0.7 %
Wire
Cu
Solder
This product is covered by a license from Immersion or its affiliates solely when incorporated into haptic products in an
authorized field of use as set forth in more detail at the following link: www.vishay.com/doc?34602. Protected under one or more
of the U.S. Patents found at the following address www.immersion.com/patent-marking.html and other patents.
Revision: 04-May-2023
Document Number: 34508
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000