IHLP-6767GZ-8A
www.vishay.com
Vishay Dale
IHLP® Automotive Inductors, High Temperature (180 °C) Series
FEATURES
• High temperature, up to 180 °C
• Shielded construction
• Excellent DC/DC energy storage up to 1 MHz
to 2 MHz; filter inductor applications up the
SRF (see Standard Electrical Specifications
table)
LINKS TO ADDITIONAL RESOURCES
• Lowest DCR/μH, in this package size
3
D
• Handles high transient current spikes up to
10 times the current rating, depending on the
duration
3D Models
Calculators
• Ultra low buzz noise, due to composite construction
• AEC-Q200 qualified
STANDARD ELECTRICAL SPECIFICATIONS
L0
INDUCTANCE
ꢀ0 ꢁ
HEAT
• IHLP design; PATENT(S): www.vishay.com/patents
DCR DCR RATING SATURATION
AT 100 kHz, TYP. MAX. CURRENT CURRENT
0.ꢀ5 V, 0 A ꢀ5 °C ꢀ5 °C DC TYP.
SRF
TYP.
(MHz)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DC TYP.
(μH)
0.47
1.0
(m) (m)
0.89 0.95
1.36 1.46
2.25 2.41
3.06 3.27
4.89 5.23
(A) (1)
65.0
53.0
38.5
32.2
24.0
17.5
16.0
12.5
11.7
8.8
(A) (ꢀ)
76.0
42.0
38.0
32.0
26.0
14.5
13.0
13.0
11.0
9.4
52.3
35.5
19.8
16.5
14.0
9.40
7.70
8.55
5.97
4.43
3.72
APPLICATIONS
• Brushless DC motor for auto EGR (exhaust gas recycle)
pump
2.2
3.3
• ADAS (advanced driver-assistance systems)
• Body electronics
4.7
8.2
8.6
9.23
- LED lighting
10.0
15.0
22.0
33.0
47.0
10.20 10.91
15.85 16.96
21.28 22.27
36.2 38.9
52.7 56.4
- Infotainment / driver information
- Mirror / window / door soft close control
• EMI filter up to 180 °C
7.25
7.0
• Storage inductors for GaN switched-mode power supply
applications
Notes
•
•
•
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +180 °C
The part temperature (ambient + temp. rise) should not exceed
180 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application
Rated operating voltage (across inductor) = 75 V
DC current (A) that will cause an approximate T of 40 °C
DC current (A) that will cause L0 to drop approximately 20 %
DIMENSIONS in inches [millimeters]
Typical pad layout
0.715
[18.16]
0.490
[12.45]
0.675 [17.15]
max.
•
(1)
0.489
[12.41]
(2)
0.276 [7.00]
max.
0.083 0.010
[2.108 0.254]
0.470 0.010
[11.938 0.254]
0.520 0.010
[13.208 0.254]
0.675 0.005
[17.150 0.127]
PATENT(S): www.vishay.com/patents
This Vishay product is protected by one or more United States and international patents.
Revision: 31-Aug-2022
Document Number: 34498
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000