IDT79RC4640™
Low-Cost Embedded
64-bit RISController
w/ DSP Capability
◆
Low-power operation
ꢌꢍꢈꢎꢏꢊꢍꢐ
◆
–
–
Active power management powers-down inactive units
Standby mode
High-performance embedded 64-bit microprocessor
–
–
–
–
64-bit integer operations
64-bit registers
Based on the MIPS RISC Architecture
100MHz, 133MHz, 150MHz, 180MHz, 200MHz and 267MHz
operating frequencies
◆
Large, efficient on-chip caches
–
Separate 8KB Instruction and 8KB Data caches
Over 3200MB/sec bandwidth from internal caches
2-set associative
Write-back and write-through support
Cache locking, to facilitate deterministic response
High performance write protocols, for graphics and data
communications
–
–
–
–
–
–
32-bit bus interface brings 64-bit power to 32-bit system cost
◆
◆
High-performance DSP capability
–
133.5 Million Integer Mul-Accumulate
operations/sec @267MHz
89 MFlops floating-point operations @267MHz
◆
Bus compatible with RC4000 family
–
–
System interfaces to 125MHz, provides bandwidth up to 500
MB/sec
High-performance microprocessor
–
–
–
133.5 M Mul-Add/second @267MHz
89 MFlops @267MHz
>640,000 dhrystone (2.1)/sec capability @267MHz (352
–
–
Direct interface to 32-bit wide systems
Synchronized to external reference clock for multi- master
operation
dhrystone MIPS)
High level of integration
–
Socket compatible with IDT RC 64474 and RC64574
◆
◆
Improved real-time support
–
–
–
64-bit, 267 MHz integer CPU
8KB instruction cache; 8KB data cache
Integer multiply unit with 133.5M Mul-Add/sec
–
–
Fast interrupt decode
Optional cache locking
◆
◆
Note: “R” refers to 5V parts; “RV” refers to 3.3V parts; “RC”
refers to both
Upwardly software compatible with IDT RISController
Family
Easily upgradable to 64-bit system
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢈꢋꢅ
System Control Coprocessor
267 MHz 64-bit CPU
89 MFlops Single-Precision FPA
FP Register File
Address Translation/
Cache Attribute Control
64-bit Register File
64-bit Adder
Load Aligner
Store Aligner
Logic Unit
Pack/Unpack
Exception Management
Functions
FP Add/Sub/Cvt/
Div/Sqrt
High-Performance
Integer Multiply
FP Multiply
Control Bus
Data Bus
Instruction Bus
Instruction Cache
Set A
(Lockable)
Data Cache
Set A
(Lockable)
32-bit
Synchronized
System Interface
Instruction Cache
Set B
Data Cache
Set B
The IDT logo is a registered trademark and RC4600, RC4650, RC3081,RC3052,RC3051,RC3041 RISController, and RISCore are trademarks of Integrated Device Technology, Inc.
1 of 23
March 28, 2000
DSC 3486/2
1999 Integrated Device Technology, Inc.