5秒后页面跳转
7130SA55CGI PDF预览

7130SA55CGI

更新时间: 2024-02-18 21:07:39
品牌 Logo 应用领域
艾迪悌 - IDT 存储内存集成电路静态存储器光电二极管
页数 文件大小 规格书
14页 168K
描述
Dual-Port SRAM, 1KX8, 55ns, CMOS, CDIP48, 0.620 X 2.430 INCH, 0.150 INCH HEIGHT, GREEN, SIDE BRAZED, DIP-48

7130SA55CGI 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFP
包装说明:LFQFP, QFP64,.47SQ,20针数:64
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.32.00.41风险等级:5.01
最长访问时间:55 nsI/O 类型:COMMON
JESD-30 代码:S-PQFP-G64JESD-609代码:e3
长度:10 mm内存密度:8192 bit
内存集成电路类型:DUAL-PORT SRAM内存宽度:8
湿度敏感等级:3功能数量:1
端口数量:2端子数量:64
字数:1024 words字数代码:1000
工作模式:ASYNCHRONOUS最高工作温度:70 °C
最低工作温度:组织:1KX8
输出特性:3-STATE封装主体材料:PLASTIC/EPOXY
封装代码:LFQFP封装等效代码:QFP64,.47SQ,20
封装形状:SQUARE封装形式:FLATPACK, LOW PROFILE, FINE PITCH
并行/串行:PARALLEL峰值回流温度(摄氏度):260
电源:5 V认证状态:Not Qualified
座面最大高度:1.6 mm最大待机电流:0.015 A
最小待机电流:4.5 V子类别:SRAMs
最大压摆率:0.155 mA最大供电电压 (Vsup):5.5 V
最小供电电压 (Vsup):4.5 V标称供电电压 (Vsup):5 V
表面贴装:YES技术:CMOS
温度等级:COMMERCIAL端子面层:Matte Tin (Sn) - annealed
端子形式:GULL WING端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:30
宽度:10 mmBase Number Matches:1

7130SA55CGI 数据手册

 浏览型号7130SA55CGI的Datasheet PDF文件第2页浏览型号7130SA55CGI的Datasheet PDF文件第3页浏览型号7130SA55CGI的Datasheet PDF文件第4页浏览型号7130SA55CGI的Datasheet PDF文件第5页浏览型号7130SA55CGI的Datasheet PDF文件第6页浏览型号7130SA55CGI的Datasheet PDF文件第7页 
IDT7130SA/LA  
IDT7140SA/LA  
HIGH-SPEED  
1K x 8 DUAL-PORT  
STATIC RAM  
Integrated Device Technology, Inc.  
FEATURES  
• High-speed access  
—Military: 25/35/55/100ns (max.)  
—Commercial: 25/35/55/100ns (max.)  
—Commercial: 20ns 7130 in PLCC and TQFP  
• Low-power operation  
—IDT7130/IDT7140SA  
Active: 550mW (typ.)  
Standby: 5mW (typ.)  
—IDT7130/IDT7140LA  
Active: 550mW (typ.)  
Standby: 1mW (typ.)  
• MASTER IDT7130 easily expands data bus width to  
16-or-more-bits using SLAVE IDT7140  
• On-chip port arbitration logic (IDT7130 Only)  
• BUSY output flag on IDT7130; BUSY input on IDT7140  
• Interrupt flags for port-to-port communication  
• Fully asynchronous operation from either port  
• Battery backup operation–2V data retention (LA only)  
• TTL-compatible, single 5V ±10% power supply  
• Military product compliant to MIL-STD-883, Class B  
• Standard Military Drawing #5962-86875  
• Industrial temperature range (–40°C to +85°C) is avail-  
able, tested to military electrical specifications  
DESCRIPTION  
The IDT7130/IDT7140 are high-speed 1K x 8 Dual-Port  
Static RAMs. The IDT7130 is designed to be used as a  
stand-alone 8-bit Dual-Port RAM or as a "MASTER" Dual-  
Port RAM together with the IDT7140 "SLAVE" Dual-Port in  
16-bit-or-more word width systems. Using the IDT MAS-  
TER/SLAVE Dual-Port RAM approach in 16-or-more-bit  
memory system applications results in full-speed, error-free  
operation without the need for additional discrete logic.  
Both devices provide two independent ports with sepa-  
rate control, address, and I/O pins that permit independent  
asynchronous access for reads or writes to any location in  
memory. An automatic power down feature, controlled by  
CE, permits the on chip circuitry of each port to enter a very  
low standby power mode.  
Fabricated using IDT's CMOS high-performance tech-  
nology, these devices typically operate on only 550mW of  
power. Low-power (LA) versions offer battery backup data  
retention capability, with each Dual-Port typically consum-  
ing 200µW from a 2V battery.  
The IDT7130/IDT7140 devices are packaged in 48-pin  
sidebraze or plastic DIPs, LCCs, or flatpacks, 52-pin PLCC,  
and 64-pin TQFP and STQFP. Military grade product is  
manufactured in compliance with the latest revision of MIL-  
STD-883, Class B, making it ideally suited to military tem-  
perature applications demanding the highest level of per-  
formance and reliability.  
FUNCTIONAL BLOCK DIAGRAM  
OER  
OEL  
CEL  
R/WL  
CER  
R/WR  
I/O0L- I/O7L  
I/O0R-I/O7R  
I/O  
Control  
I/O  
Control  
(1,2)  
(1,2)  
BUSYR  
BUSYL  
A9L  
A0L  
A9R  
Address  
Decoder  
MEMORY  
ARRAY  
Address  
Decoder  
A0R  
10  
10  
NOTES:  
ARBITRATION  
and  
INTERRUPT  
LOGIC  
1. IDT7130 (MASTER): BUSY is open  
drain output and requires pullup  
resistor of 270.  
CEL  
OEL  
CER  
OER  
R/WR  
R/WL  
IDT7140 (SLAVE): BUSY is input.  
2. Open drain output: requires pullup  
resistor of 270.  
(2)  
(2)  
INTL  
INTR  
2689 drw 01  
The IDT logo is a registered trademark of Integrated Device Technology, Inc.  
MILITARY AND COMMERCIAL TEMPERATURE RANGES  
OCTOBER 1996  
©1996 Integrated Device Technology, Inc.  
DSC-2689/7  
For latest information contact IDT’s web site at www.idt.com or fax-on-demand at 408-492-8391.  
6.01  
1

与7130SA55CGI相关器件

型号 品牌 描述 获取价格 数据表
7130SA55CGI8 IDT Dual-Port SRAM, 1KX8, 55ns, CMOS, CDIP48

获取价格

7130SA55CI IDT Dual-Port SRAM, 1KX8, 55ns, CMOS, CDIP48, SIDE BRAZED, DIP-48

获取价格

7130SA55CI8 IDT Multi-Port SRAM, 1KX8, 55ns, CMOS, CDIP48

获取价格

7130SA55FGB8 IDT HIGH SPEED 1K X 8 DUAL-PORT STATIC SRAM

获取价格

7130SA55FGI8 IDT HIGH SPEED 1K X 8 DUAL-PORT STATIC SRAM

获取价格

7130SA55J IDT Dual-Port SRAM, 1KX8, 55ns, CMOS, PQCC52, 0.750 X 0.750 INCH, 0.170 INCH HEIGHT, GREEN, PL

获取价格