5秒后页面跳转
1894K-40LFT PDF预览

1894K-40LFT

更新时间: 2024-02-20 11:14:17
品牌 Logo 应用领域
艾迪悌 - IDT /
页数 文件大小 规格书
53页 331K
描述
10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

1894K-40LFT 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:VFQFPN
包装说明:HVQCCN, LCC40,.24SQ,20针数:40
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.37
数据速率:100000 MbpsJESD-30 代码:S-XQCC-N40
JESD-609代码:e3长度:6 mm
湿度敏感等级:3功能数量:1
端子数量:40收发器数量:1
最高工作温度:70 °C最低工作温度:
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装等效代码:LCC40,.24SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:3.3 V认证状态:Not Qualified
座面最大高度:1 mm子类别:Network Interfaces
标称供电电压:3.3 V表面贴装:YES
技术:CMOS电信集成电路类型:INTERFACE CIRCUIT
温度等级:COMMERCIAL端子面层:Matte Tin (Sn) - annealed
端子形式:NO LEAD端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:30
宽度:6 mmBase Number Matches:1

1894K-40LFT 数据手册

 浏览型号1894K-40LFT的Datasheet PDF文件第2页浏览型号1894K-40LFT的Datasheet PDF文件第3页浏览型号1894K-40LFT的Datasheet PDF文件第4页浏览型号1894K-40LFT的Datasheet PDF文件第5页浏览型号1894K-40LFT的Datasheet PDF文件第6页浏览型号1894K-40LFT的Datasheet PDF文件第7页 
DATASHEET  
10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE  
ICS1894-40  
Description  
Features  
The ICS1894-40 is a low-power, physical-layer device  
(PHY) that supports the ISO/IEC 10Base-T and  
100Base-TX Carrier-Sense Multiple Access/Collision  
Detection (CSMA/CD) Ethernet standards, ISO/IEC  
8802.3. It is intended for RMII/MII, Node/Repeater  
applications and includes the Auto-MDIX feature that  
automatically corrects crossover errors in plant wiring.  
Supports category 5 cables and above with attenuation in  
excess of 24dB at 100 MHz.  
Single-chip, fully integrated PHY provides PCS, PMA,  
PMD, and AUTONEG sub layers functions of IEEE  
standard.  
10Base-T and 100Base-TX IEEE 8802.3 compliant  
MIIM (MDC/MDIO) management bus for PHY register  
The ICS1894-40 incorporates Digital-Signal Processing  
(DSP) control in its Physical-Medium Dependent (PMD)  
sub-layer. As a result, it can transmit and receive data on  
unshielded twisted-pair (UTP) category 5 cables with  
attenuation in excess of 24 dB at 100MHz.  
configuration  
RMII interface support with external 50 MHz system clock  
Single 3.3V power supply  
Highly configurable, supports:  
The ICS1894-40 provides a Serial-Management Interface  
for exchanging command and status information with a  
Station-Management (STA) entity. The ICS1894-40  
Media-Dependent Interface (MDI) can be configured to  
provide either half-duplex or full-duplex operation at data  
rates of 10 Mb/s or 100Mb/s.  
– Media Independent Interface (MII)  
– Auto-Negotiation with Parallel detection  
– Node applications, managed or unmanaged  
– 10M or 100M full and half-duplex modes  
– Loopback mode for Diagnostic Functions  
Auto-MDI/MDIX crossover correction  
Low-power CMOS (typically 300 mW)  
Power-Down mode (typically 21mW)  
Clock and crystal supported in MII mode  
Programmable LEDs  
In addition, the ICS1894-40 includes a programmable LED  
and interrupt output function. The LED outputs can be  
configured through registers to indicate the occurance of  
certain events such as LINK, COLLISION, ACTIVITY, etc.  
The purpose of the programmable interrupt output is to  
notify the PHY controller device immediately when a certain  
event happens instead of having the PHY controller  
continuously poll the PHY. The events that could be used to  
generate interrupts are: receiver error, Jabber, page  
received, parallel detect fault, link partner acknowledge, link  
status change, auto-negotiation complete, remote fault,  
collision, etc.  
Interrupt output pin  
Fully integrated, DSP-based PMD includes:  
– Adaptive equalization and baseline-wander  
correction  
The ICS1894-40 has deep power modes that can result in  
significant power savings when the link is broken.  
Transmit wave shaping and stream cipher  
scrambler  
– MLT-3 encoder and NRZ/NRZI encoder  
Core power supply (3.3 V)  
Applications: NIC cards, PC motherboards, switches,  
routers, DSL and cable modems, game machines, printers,  
network connected appliances, and industrial equipment.  
3.3 V/1.8 V VDDIO operation supported  
Smart power control with deep power down feature  
Available in 40-pin (6mm x 6mm) QFN package, Pb-free  
Industrial Temp and Lead Free  
IDT® 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE  
1
ICS1894-40  
REV G 060110  

与1894K-40LFT相关器件

型号 品牌 描述 获取价格 数据表
1894KI-32LF IDT 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

获取价格

1894KI-32LFT IDT 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

获取价格

1894KI-40LF IDT 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

获取价格

1894KI-40LFT IDT 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

获取价格

1895007 PHOENIX Modular Terminal Block, 4A, 1 Row(s), 1 Deck(s), ROHS COMPLIANT

获取价格

1895010 PHOENIX Modular Terminal Block, 4A, 1 Row(s), 1 Deck(s), ROHS COMPLIANT

获取价格