5秒后页面跳转
1893BFIT PDF预览

1893BFIT

更新时间: 2024-02-04 15:25:53
品牌 Logo 应用领域
艾迪悌 - IDT 电信光电二极管电信集成电路
页数 文件大小 规格书
138页 1444K
描述
Interface Circuit, 1-Trnsvr, CMOS, PDSO48, 0.300 INCH, SSOP-48

1893BFIT 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:SSOP包装说明:0.300 INCH, SSOP-48
针数:48Reach Compliance Code:not_compliant
HTS代码:8542.39.00.01风险等级:5.36
数据速率:100000 MbpsJESD-30 代码:R-PDSO-G48
JESD-609代码:e0长度:15.875 mm
湿度敏感等级:1功能数量:1
端子数量:48收发器数量:1
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:SSOP
封装等效代码:SSOP48,.4封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, SHRINK PITCH峰值回流温度(摄氏度):225
电源:3.3 V认证状态:Not Qualified
座面最大高度:2.8 mm子类别:Network Interfaces
最大压摆率:0.16 mA标称供电电压:3.3 V
表面贴装:YES技术:CMOS
电信集成电路类型:INTERFACE CIRCUIT温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn85Pb15)端子形式:GULL WING
端子节距:0.635 mm端子位置:DUAL
处于峰值回流温度下的最长时间:20宽度:7.5 mm
Base Number Matches:1

1893BFIT 数据手册

 浏览型号1893BFIT的Datasheet PDF文件第2页浏览型号1893BFIT的Datasheet PDF文件第3页浏览型号1893BFIT的Datasheet PDF文件第4页浏览型号1893BFIT的Datasheet PDF文件第5页浏览型号1893BFIT的Datasheet PDF文件第6页浏览型号1893BFIT的Datasheet PDF文件第7页 
Integrated Device Technology, Inc.  
Document Type: Data Sheet  
ICS1893BF  
Document Stage: Rev. E Release  
3.3-V 10Base-T/100Base-TX Integrated PHYceiver™  
General  
Features  
The ICS1893BF is a low-power, physical-layer device (PHY)  
that supports the ISO/IEC 10Base-T and 100Base-TX  
Carrier-Sense Multiple Access/Collision Detection  
(CSMA/CD) Ethernet standards, ISO/IEC 8802-3.  
Supports category 5 cables with attenuation in excess of  
24dB at 100 MHz.  
Single-chip, fully integrated PHY provides PCS, PMA, PMD,  
and AUTONEG sub layers functions of IEEE standard.  
The ICS1893BF is intended for MII, Node applications that  
require the Auto-MDIX feature that automatically corrects  
crossover errors in plant wiring.  
10Base-T and 100Base-TX IEEE 8802.3 compliant  
Single 3.3V power supply  
The ICS1893BF incorporates Digital-Signal Processing (DSP)  
control in its Physical-Medium Dependent (PMD) sub layer. As  
a result, it can transmit and receive data on unshielded  
twisted-pair (UTP) category 5 cables with attenuation in  
excess of 24 dB at 100MHz. With this ICS-patented  
technology, the ICS1893BF can virtually eliminate errors from  
killer packets.  
Highly configurable, supports:  
– Media Independent Interface (MII)  
– Auto-Negotiation with Parallel detection  
– Node applications, managed or unmanaged  
– 10M or 100M full and half-duplex modes  
– Loopback mode for Diagnostic Functions  
– Auto-MDI/MDIX crossover correction  
The ICS1893BF provides a Serial-Management Interface for  
exchanging command and status information with a  
Station-Management (STA) entity. The ICS1893BF  
Media-Dependent Interface (MDI) can be configured to  
provide either half- or full-duplex operation at data rates of 10  
Mb/s or 100Mb/s.  
Low-power CMOS (typically 400 mW)  
Power-Down mode typically 21mW  
Clock and crystal supported  
Fully integrated, DSP-based PMD includes:  
– Adaptive equalization and baseline-wander correction  
– Transmit wave shaping and stream cipher scrambler  
– MLT-3 encoder and NRZ/NRZI encoder  
The ICS1893BF is available in a 300-mil 48-lead SSOP  
package. The ICS1893BF shares the same proven  
performance circuitry with the ICS1893AF but is not a  
pin-for-pin replacement of the 1893AF. An application note for  
a dual footprint layout to accommodate ICS1893AF or  
ICS1893BF is available on the ICS website.  
Small footprint 48-pin 300 mil. SSOP package  
Also available in small footprint 56-pin 8x8 MLF2 package  
Available in Industrial Temp and Lead Free  
Applications: NIC cards, PC motherboards, switches,  
routers, DSL and cable modems, game machines,  
printers.  
NOTE: EOL for non-green parts to occur on  
5/13/10 per PDN U-09-01  
ICS1893BF Block Diagram  
100Base-T  
PCS  
PMA  
TP_PMD  
Framer  
CRS/COL  
Detection  
Parallel to Serial  
4B/5B  
Clock Recovery  
Link Monitor  
Signal Detection  
Error Detection  
MLT-3  
10/100 MII  
MAC  
Interface  
Twisted-  
Pair  
Interface to  
Magnetics  
Modulesand  
RJ45  
Interface  
MUX  
Integrated  
Switch  
Stream Cipher  
Adaptive Equalizer  
Baseline Wander  
Correction  
10Base-T  
Connector  
MII  
Low-Jitter  
Clock  
Synthesizer  
Auto-  
Negotiation  
Configuration  
and Status  
Extended  
Register  
Set  
MII  
Management  
Interface  
Clock  
Power  
LEDs and PHY  
Address  
IDT reserves the right to make changes in the device data identified in  
this publication without further notice. IDT advises its customers to  
obtain the latest version of all device data to verify that any information  
being relied upon by the customer is current and accurate.  
ICS1893BF, Rev. E, 8/11/09  
August, 2009  

与1893BFIT相关器件

型号 品牌 描述 获取价格 数据表
1893BFLF IDT 3.3-V 10Base-T/100Base-TX Integrated PHYceive

获取价格

1893BFT IDT Interface Circuit, 1-Trnsvr, CMOS, PDSO48, 0.300 INCH, SSOP-48

获取价格

1893BK IDT Interface Circuit, 1-Trnsvr, CMOS, PQCC56, 8 X 8 MM, PLASTIC, M0-220VLLD-5, MLF2-56

获取价格

1893BKIT IDT Interface Circuit, 1-Trnsvr, CMOS, PQCC56, 8 X 8 MM, PLASTIC, M0-220VLLD-5, MLF2-56

获取价格

1893BKT IDT Interface Circuit, 1-Trnsvr, CMOS, PQCC56, 8 X 8 MM, PLASTIC, M0-220VLLD-5, MLF2-56

获取价格

1893BY-10 IDT Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP64, 10 X 10 MM, 1 MM HEIGHT, TQFP-64

获取价格