ICX055AL
1/3-inch CCD Image Sensor for CCIR B/W Camera
For the availability of this product, please contact the sales office.
Description
16 pin DIP (Plastic)
The ICX055AL is an interline CCD solid-state
image sensor suitable for CCIR 1/3-inch B/W video
cameras. High sensitivity is achieved through the
adoption of HAD (Hole-Accumulation Diode) sensors.
This chip features a field period readout system,
and an electronic shutter with variable charge-
storage time.
Features
Pin 1
• High sensitivity (+3dB compare with ICX045BLA)
1
and low dark current
• Continuous variable-speed shutter
1/50s (Typ.), 1/120s to 1/10000s
• Low smear
V
14
• Excellent antiblooming characteristics
• Horizontal register: 5V drive
7
30
H
• Reset gate:
5V drive
Pin 9
Optical black position
Device Structure
(Top View)
• Optical size:
1/3-inch format
• Number of effective pixels: 500 (H) × 582 (V) approx. 290K pixels
• Number of total pixels:
• Interline CCD image sensor
• Chip size:
537 (H) × 597 (V) approx. 320K pixels
6.00mm (H) × 4.96mm (V)
9.8µm (H) × 6.3µm (V)
• Unit cell size:
• Optical black:
Horizontal (H) direction: Front 7 pixels, Rear 30 pixels
Vertical (V) direction:
Horizontal 16
Front 14 pixels, Rear 1 pixel
• Number of dummy bits:
• Substrate material:
Vertical
Silicon
1 (even field only)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
– 1 –
E92832F66-ST