PRELIMINARY
ICS8602
Integrated
Circuit
Systems, Incꢀ
ZERO DELAY, DIFFERENTIAL-TO-LVCMOS/LVTTL
CLOCK GENERATOR
GENERAL DESCRIPTION
FEATURES
The ICS8602 is a high performance, low skew,
• Fully integrated PLL
,&6
1-to-9 Differential-to-LVCMOS/LVTTL Zero De-
• 9 LVCMOS/LVTTL outputs, 7Ω typical output impedance
HiPerClockS™
lay Buffer and a member of the HiPerClockS™
family of High Performance Clocks Solutions
from ICS. The CLK, nCLK pair can accept most
• CLK, nCLK pair can accept the following differential
input levels: LVPECL, LVDS, LVHSTL, SSTL, HCSL
standard differential input levels. The VCO operates at a fre-
quency range of 250MHz to 500MHz. The external feedback
allows the device to achieve “zero delay” between the input
clock and the output clocks. The device is designed only for
1:1 input/output frequency ratios. The output divider allows a
wide input/output frequency range with the 250MHz to
500MHz VCO. The PLL_SEL pin can be used to bypass the
PLL for system test and debug purposes. In bypass mode,
the reference clock is routed around the PLL and into the in-
ternal output dividers.The low impedance LVCMOS/LVTTL out-
puts are designed to drive 50Ω series or parallel terminated
transmission lines. The effective fanout can be doubled by
utilizing the ability of the outputs to drive two series termi-
nated lines. The differential reference clock input will accept
any differential signal levels.
• Output frequency range: 15.625MHz to 250MHz
• Input frequency range: 15.625MHz to 250MHz
• VCO range: 250MHz to 500MHz
• External feedback for “zero delay” clock regeneration
with configurable frequencies
• Cycle-to-cycle jitter: 36ps (typical)
• Output skew: 125ps (maximum)
• Static Phase Offset: TBD±100ps (typical)
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
BLOCK DIAGRAM
PIN ASSIGNMENT
Q0
SEL0
SEL1
32 31 30 29 28 27 26 25
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
VDDA
VDD
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
VDDO
Q5
CLK
GND
Q4
÷2
÷4
÷8
÷16
0
1
nCLK
CLK
ICS8602
GND
VDDO
Q3
nCLK
PLL
DIV_SEL0
DIV_SEL1
GND
MR/nOE
GND
FB_IN
9
10 11 12 13 14 15 16
PLL_SEL
MR/nOE
32-Lead LQFP
7mm x 7mm x 1.4mm package body
Y Package
Top View
The Preliminary Information presented herein represents a product in prototyping or pre-production. The noted characteristics are based on initial
product characterization. Integrated Circuit Systems, Incorporated (ICS) reserves the right to change any circuitry or specifications without notice.
8602BY
www.icst.com/products/hiperclocks.html
REV. F APRIL 16, 2003
1