ICS‐43432
Low‐Noise Microphone with I2S Digital Output
APPLICATIONS
GENERAL DESCRIPTION
Wearables
The ICS‐43432 is a digital I2S output bottom port microphone.
The complete ICS‐43432 solution consists of a MEMS sensor,
signal conditioning, an analog‐to‐digital converter, decimation
and anti‐aliasing filters, power management, and an industry
standard 24‐bit I²S interface. The I²S interface allows the
ICS‐43432 to connect directly to digital processors, such as DSPs
and microcontrollers, without the need for an audio codec in the
system.
Smart Televisions
Remote Controls
Teleconferencing Systems
Gaming Consoles
Security Systems
Microphone Arrays
The ICS‐43432 has a high SNR of 65 dBA and a wideband
frequency response. The sensitivity tolerance of the ICS‐43432
is ±1 dB, which enables high‐performance microphone arrays
without the need for system calibration.
FEATURES
Digital I²S Interface with High Precision 24‐bit Data
High 65 dBA SNR
−26 dB FS Sensitivity
±1 dB Sensitivity Tolerance
The ICS‐43432 is available in a small 4 mm × 3 mm × 1 mm
surface‐mount package.
Wide Frequency Response from 50 Hz to 20 kHz
Low Current Consumption: 1.0 mA
High Power Supply Rejection: −80 dB FS
116 dB SPL Acoustic Overload Point
Small 4 mm × 3 mm × 1 mm Surface‐Mount Package
Compatible with Sn/Pb and Pb‐Free Solder Processes
RoHS/WEEE Compliant
FUNCTIONAL BLOCK DIAGRAM
ORDERING INFORMATION
PART
ICS‐43432
TEMP RANGE
−40°C to +85°C
PACKAGING
13” Tape & Reel
ICS‐43432
FILTER
ADC
SCK
SD
EV_ICS‐43432‐FX
—
2
I S
SERIAL
PORT
WS
POWER
MANAGEMENT
HARDWARE
CONTROL
InvenSense Inc.
1745 Technology Drive, San Jose, CA 94089 U.S.A
+1(408) 988–7339
InvenSense reserves the right to change the detail
specifications as may be required to permit
improvements in the design of its products.
Document Number: DS‐000038
Revision: 1.3
Release Date: 4/27/2016
www.invensense.com