ICS‐41350
Bottom Port PDM Low‐Power Multi‐Mode
Microphone With High AOP Mode
APPLICATIONS
GENERAL DESCRIPTION
Smartphones
The ICS‐41350 is a low‐power, low‐noise digital MEMS
microphone in a small package. The ICS‐41350 consists of a
MEMS microphone element and an impedance converter
amplifier followed by a fourth‐order Σ‐Δ modulator. The pulse
density modulated (PDM) interface allows two microphones
to be time multiplexed on a data line using a single clock.
Microphone Arrays
Tablets
Cameras
Bluetooth Headsets
Notebook PCs
Security and Surveillance
The ICS‐41350 has multiple modes of operation: High
Performance, Low Power (AlwaysOn), Standard and Sleep.
The ICS‐41350 has low power and high SNR in all operational
modes. It has 126 dB SPL AOP in High Performance mode, and
120 dB SPL AOP in Standard and Low‐Power modes.
FEATURES
SPEC
LOW‐POWER
STANDARD
MODE
HIGH
PERFORMANCE
MODE
MODE
Sensitivity
SNR
−26 dB FS ±1 dB
63 dBA
−26 dB FS ±1 dB
64 dBA
−32 dB FS ±1 dB
64 dBA
The ICS‐41350 supports ultrasound applications in High
Performance Mode. It has an extended ultrasonic response up to
40 kHz with high SNR.
Current
AOP
Clock
185 µA
120 dB SPL
400 – 800 kHz
430 µA
120 dB SPL
1.0 – 3.3 MHz
650 µA
126 dB SPL
4.1 – 4.8 MHz
3.5 × 2.65 × 0.98 mm surface‐mount package
Low power: 185 µA in Low‐Power Mode
Extended frequency response from 50 Hz to >20 kHz
Ultrasound support up to 40 kHz
Sleep Mode: 12 µA
High power supply rejection (PSR): −97 dB FS
Fourth‐order Σ‐Δ modulator
Digital pulse density modulation (PDM) output
Compatible with Sn/Pb and Pb‐free solder processes
RoHS/WEEE compliant
The ICS‐41350 is available in a small 3.5 × 2.65 × 0.98 mm
surface‐mount package. It is reflow solder compatible with
no sensitivity degradation.
FUNCTIONAL BLOCK DIAGRAM
ORDERING INFORMATION
PART
ICS‐41350
EV_ICS‐41350‐FX
TEMP RANGE
−40°C to +85°C
PACKAGING
13” Tape and Reel
ICS‐41350
CLK
PDM
ADC
—
MODULATOR
DATA
POWER
MANAGEMENT
CHANNEL
SELECT
InvenSense Inc.
1745 Technology Drive, San Jose, CA 95110 U.S.A
+1(408) 988–7339
InvenSense reserves the right to change the detail
specifications as may be required to permit
improvements in the design of its products.
Document Number: DS‐000047
Revision: 1.1
Rev Date: 06/23/2016
www.invensense.com