ISOCOM
COMPONENTS
ICPL3120
DESCRIPTION
The ICPL3120 consists of an Infrared Light Emitting
Diode optically coupled to an Integrated Circuit with a
Power Driving Output. ICPL3120 is ideally suitable to
drive the Power IGBT and MOSFET in Inverters of
Motor Controls and in Power Supplies.
1
2
3
4
5
6
7
8
NC
Anode
Cathode
NC
GND (VEE)
VO
The 2.5A peak output current is capable to direct drive
IGBT/MOSFET up to ratings of 1200V/100A. For IGBTs
with higher ratings, ICPL3120 can be used to drive a
discrete power stage which drives the IGBT gate.
VO
VCC
A 0.1μF bypass Capacitor must be connected between Pins 8 and 5.
FEATURES
•
•
±2.5A Maximum Peak Output Current
35kV/μs Minimum Common Mode Rejection
at VCM 1500V
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Stresses exceeding the absolute maximum ratings can cause
permanent damage to the device.
•
•
•
Maximum Propagation Delay 500ns
Maximum Propagation Delay Difference 100ns
Wide Operating Voltage Range
VCC 15 to 30 V
Maximum Supply Current ICC 3.5mA
Under Voltage Lock Out (UVLO) Protection
with Hysteresis
Guaranteed Performance over
Temperature Range - 40°C to +105°C
MSL 1
Lead Free and RoHS Compliant
Safety Approvals Pending
Exposure to absolute maximum ratings for long periods of time
can adversely affect reliability.
Input
Forward Current
20mA
1A
•
•
Forward Peak Current
(Pulse Width ≤ 1μs, 300pps)
Forward Current Rise / Fall Time
Reverse Voltage
500ns
5V
•
•
•
•
Power dissipation
45mW
Output
Peak Output Current
(Exponential waveform,
±2.5A
50kHz
APPLICATIONS
Pulse Width ≤ 0.3μs, f ≤ = 15kHz)
•
•
•
•
IGBT/MOSFET Gate Drive
UPS
Inverters
Operating Frequency
(Exponential waveform,
IO(Peak) ≤ l2.5Al, Pulse Width ≤ 0.3μs)
Supply Voltage (VCC ‒ VEE)
Output Voltage
0V to 35V
0V to VCC
250mW
AC Brushless and DC Motor Drives
Power Dissipation
ORDER INFORMATION
•
•
•
Add G after PN for 10mm lead spacing
Add SM after PN for Surface Mount
Add SMT&R after PN for Surface Mount
Tape & Reel
Total Package
Isolation Voltage
5000VRMS
295mW
Total Power Dissipation
Operating Temperature
Storage Temperature
-40 to 105 °C
-55 to 125 °C
260°C
Lead Soldering Temperature
(10s)
ISOCOM COMPONENTS 2004 LTD
Unit 25B, Park View Road West, Park View Industrial Estate
Hartlepool, Cleveland, TS25 1PE, United Kingdom
Tel : +44 (0)1429 863 609 Fax : +44 (0)1429 863 581
e-mail : sales@isocom.co.uk
ISOCOM COMPONENTS ASIA LTD
Hong Kong Office,
Block A, 8/F, Wah Hing Industrial mansion,
36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong.
Tel : +852 2995 9217 Fax : +852 8161 6292
e-mail : sales@isocom.com.hk
http://www.isocom.com
DD93213
1 28/09/2017