ICM7244
®
Data Sheet
January 22, 2009
FN6675.1
8-Character, Microprocessor Compatible,
LED Display Decoder Driver
Features
• 6-Segment Fonts with Decimal Point
The ICM7244 is an 8-character, alphanumeric display driver
and controller which provides all the circuitry required to
interface a microprocessor or digital system to a 16-segment
display with internal pull-up resistors. It is primarily intended
for use in microprocessor systems, where it minimizes
hardware and software overhead. Incorporated on-chip are a
64-character ASClI decoder, 8x6 memory, high power
character and segment drivers, and the multiplex scan
circuitry.
• Has Internal Pull-Up Resistors of 617Ω Typ.
• Mask Programmable for Other Font-Sets Up to 64
Characters
• Microprocessor Compatible
• Directly Drives LED Common Cathode Displays
• Cascadable Without Additional Hardware
• Standby Feature Turns Display Off; Puts Chip in Low
Power Mode
6-bit ASCll data to be displayed is written into the memory
directly from the microprocessor data bus. Data location
depends upon the selection of either Sequential
• Sequential Entry or Random Entry of Data Into Display
• Single +5V Operation
(MODE = 1) or Random access mode (MODE = 0). In the
Sequential Access mode the first entry is stored in the
lowest location and displayed in the “left-most” character
position. Each subsequent entry is automatically stored in
the next higher location and displayed to the immediate
“right” of the previous entry. A DISPlay FULL signal is
provided after 8 entries; this signal can be used for
cascading devices together. A CLR pin is provided to clear
the memory and reset the location counter. The Random
Access mode allows the processor to select the memory
address and display digit for each input word.
• Character and Segment Drivers, All MUX Scan Circuitry,
8x6 Static Memory and 64-Character ASCll Font
Generator Included On-Chip
• Pb-Free (RoHS Compliant)
The character multiplex scan runs whenever data is not
being entered. It scans the memory and CHARacter drivers,
and ensures that the decoding from memory to display is
done in the proper sequence. Intercharacter blanking is
provided to avoid display ghosting.
Ordering Information
PART NUMBER
TEMP. RANGE
PACKAGE
(Pb-Free)
(Note)
PART MARKING
ICM7244 AIM44Z
ICM7244 AIM44Z
(°C)
PKG. DWG. #
ICM7244AIM44Z
ICM7244AIM44ZT
-25°C to +85°C
-25°C to +85°C
44 Ld MQFP
Q44.10x10
44 Ld MQFP (Tape and Reel) Q44.10x10
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
