TM
ICL8211, ICL8212
October 1999
Programmable Voltage Detectors
Features
Description
• High Accuracy Voltage Sensing and Generation
• Internal Reference 1.15V Typical
The Intersil ICL8211/8212 are micropower bipolar monolithic
integrated circuits intended primarily for precise voltage
detection and generation. These circuits consist of an
accurate voltage reference, a comparator and a pair of
output buffer/drivers.
• Low Sensitivity to Supply Voltage and Temperature
Variations
Specifically, the ICL8211 provides a 7mA current limited out-
put sink when the voltage applied to the ‘THRESHOLD’
terminal is less than 1.15V (the internal reference). The
ICL8212 requires a voltage in excess of 1.15V to switch its
output on (no current limit). Both devices have a low current
output (HYSTERESIS) which is switched on for input
voltages in excess of 1.15V. The HYSTERESIS output may
be used to provide positive and noise free output switching
using a simple feedback network.
• Wide Supply Voltage Range Typ. 1.8V to 30V
• Essentially Constant Supply Current Over Full Supply
Voltage Range
• Easy to Set Hysteresis Voltage Range
• Defined Output Current Limit ICL8211
• High Output Current Capability ICL8212
Applications
• Low Voltage Sensor/Indicator
Ordering Information
• High Voltage Sensor/Indicator
TEMPERATURE
• Nonvolatile Out-of-Voltage Range Sensor/Indicator
• Programmable Voltage Reference or Zener Diode
• Series or Shunt Power Supply Regulator
• Fixed Value Constant Current Source
PART NUMBER
ICL8211CPA
ICL8211CBA
ICL8211CTY
RANGE
PACKAGE
8 Lead Plastic DIP
8 Lead SOlC (N)
8 Pin Metal Can
8 Pin Metal Can
0oC to +70oC
0oC to +70oC
0oC to +70oC
-55oC to +125oC
ICL8211MTY
(Note 1)
ICL8212CPA
ICL8212CBA
ICL8212CTY
0oC to +70oC
0oC to +70oC
0oC to +70oC
-55oC to +125oC
8 Lead Plastic DIP
8 Lead SOlC (N)
8 Pin Metal Can
8 Pin Metal Can
ICL8212MTY
(Note 1)
NOTE:
1. Add /883B to part number if 883B processing is required
Pinouts
ICL8211 (PDIP, SOIC)
ICL8211 (CAN)
TOP VIEW
TOP VIEW
HYSTERESIS
8
NC
HYSTERESIS
THRESHOLD
OUTPUT
1
2
3
4
8
7
6
5
V+
THRESHOLD
1
3
7
5
V+
NC
NC
2
6
NC
OUTPUT
GROUND
NC
NC
4
GROUND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
FN3184.2
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
7-161