Advance Data Sheet: iAF Series – Non-isolated SMT Power Module
iAF Series DC/DC Power Modules
4.5-14V Input, 20A Output
Surface Mount Power Module
iAF power modules perform local voltage conversion from any bus
voltage in the 5V to 12V range. The iAF12020A007V utilizes a
low component count that results in both a low cost structure and
a high level of performance. The open-frame, compact, surface
mountable design features a low profile and weight as well as
additional edge plated pads that allow for extremely flexible and
robust manufacturing processes.
Features
Optional Features
•
Size – 33mm x 13.46 mm x 7.75 mm
•
•
•
Negative logic on/off
(1.3 in. x 0.53 in. x 0.305 in.)
DOSA Compatible Footprint
Edge plated castellations for forming
inspectable solder joints
Surface mountable
Maximum weight 5.5g (0.194 oz)
Up to 110W of output power in high
ambient temperature, low airflow
environments with no power derating
Positive logic on/off
No output voltage sequencing
Solder bumping for enhanced
solderability on the EPC footprint
•
•
•
•
•
•
•
•
•
Flexible Output Voltage Sequencing
Starts with pre-biased output
Output voltage adjustment – industry
standard
•
Outstanding transient response
without the need for external loop
tuning components
•
•
•
•
Constant switching frequency
Remote Sense
Power Good
Full, auto-recovery protection:
o Input under voltage
o Short circuit
o Thermal limit
•
•
ISO Certified manufacturing facilities
Patent pending
℡
(877) 498-0099
©2011 TDK Innoveta Inc.
iAF12_Full_Datasheet_08152011.doc 8/16/2011
1/18