DATA SHEET
HY2004 120 WATTS
The ILP HY2004 Power Amplifier is a fully encaps ulated high quality power amplifier
with Integral heatsink.
By selecting the appropiate mains transformer and programming link the
amplifier can be used with 4 or 8Ω loads with the automatic adjustment of input
s ens itivity.
Mounting can be achieved by the use of T-slots in the heatsink and the nuts and
bolts provided.
TYPICAL SPECIFICATIONS
•
•
FEATURES
Parameter
Output Power
Frequency Res pons e (-3dB)
Total Harmonic Distortion @ 1kHz
Signal to Noise Ratio (DIN AUDIO)
Slew Rate typical
Ris e Time
Input Sensitivity
Input Impedance
Damping Factor(8Ω @ 100Hz)
Load Impedance (programmable)
Maximum D.C. rails (8Ω load)
Size Width x Height x Extrusion Cut 120x75x80mm
Weight 835g
Value
Programmable 4 or 8Ω
operation
150W rms. Max
15Hz - 50kHz
0.005%
100dB
20V/µS
5µS
500mV rms.
100KΩ
>400
4 or 8Ω
±55V
•
•
•
•
•
•
Enhanced specifications
Anti-thump Circuitry
Integral heatsink
Thermal Protection
PTH Circuit Board
Encapsulated
POWER SUPPLY REQUIREMENTS
ILP have developed a range of Hi-Fi quality Low nois e Audio Power Toroidal
Trans formers for the HY2004 they are Low Profile with Res in filled centres for
maximum noise absorption and ease of mounting. Finished in black to match the
amplifiers these transformers are the ideal choice to power the HY2004.
Mode
4Ω
8Ω
Trans former
AT1204
AT1208
RMS Supply Voltage
32 - 0 - 32v
40 - 0 - 40v
Size
110x50mm
110x50mm
Weight
2.1Kg
2.1Kg
SPONG LANE ELMSTED ASHFORD KENT TN25 5J U
PHONE +44 (0)1233 750481 FAX +44 (0)1233 750578