APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO +120 C
30 A
-10 C TO +60 C (1)
TEMPERATURE RANGE
TEMPERATURE RANGE
CURRENT
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
RATING
STORAGE
HUMIDITY RANGE
VOLTAGE
600 V AC/DC
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
ELECTRIC CHARACTERISTICS
10A DC.
POWER:3mΩ/SIGNAL:10mΩ
/SHIELD:50mΩ MAX.
POWER:3mΩ/SIGNAL:10mΩ
/SHIELD:50mΩ MAX.
×
×
-
-
CONTACT RESISTANCE
2
△
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
20 mV AC MAX, 10mA(DC OR 1000Hz)
2
△
×
×
-
-
1000 V DC.
100 MΩ MIN.
VOLTAGE PROOF
2500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
① CONTACT RESISTANCE:
×
-
30 TIMES INSERTIONS AND EXTRACTIONS.
POWER:5mΩMAX/SIGNAL:20mΩMAX
②
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
×
-
-
VIBRATION
FREQUENCY 20 TO 200Hz (88m/s2)
SWEEP TIME 3min.(ROUND TRIP)
AT 3h FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
7MIN , 1s MIN.
② CONTACT RESISTANCE:
×
-
POWER:5mΩMAX/SIGNAL:20mΩMAX
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
×
-
-
LOCK STRENGTH
MEASURE BREAK STRENGTH OF THE LOCK BY 98N MIN.
PULLING THE CONNECTOR IN THE MATING
DIRECTION.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE:
EXPOSED AT 85 C, 90 ~ 95 %, 96 h.
×
-
(STEADY STATE)
POWER:5mΩMAX/SIGNAL:20mΩMAX
② INSULATION RESISTANCE:100 M MIN.
×
×
×
-
-
-
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE:
POWER:5 m MAX.
TEMPERATURE- 40 →ROOM TEMP →120C→
ROOM TEMP
② INSULATION RESISTANCE:100 M MIN.
TIME
30 →
5 → 30 → 5 min
×
×
×
-
-
-
③
UNDER 1000 CYCLES.
EXPOSED AT 125C, 300 h.
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
DRY HEAT
① CONTACT RESISTANCE:
POWER:5mΩMAX/SIGNAL:20mΩMAX
②
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
×
-
-
EXPOSED AT -40C , 120 h.
① CONTACT RESISTANCE:
POWER:5mΩMAX/SIGNAL:20mΩMAX
COLD
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
×
-
-
RESISTANCE TO SO2 GAS
WATERPROOFNESS
EXPOSED IN 25 PPM AT 75% MIN FOR 96h.
CONTACT RESISTANCE:
POWER:5mΩMAX/SIGNAL:20mΩMAX
NO WATER IS INSIDE THE CONNECTOR.
SINKING TO WATER AFTER EXPOSED AT 125℃
WITH CONNECTORS MATED AND ATTACHED TO
RECOMMENDED PANEL.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
TS.SHIMIZU
CHECKED
DATE
2
△
2
DIS-T-00003861
AH.EDASHIGE
HK.UMEHARA
HK.UMEHARA
KO.NAKAMURA
MN.SATOH
20180928
20171129
20171129
20171129
20171129
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
.
(NOTE1) "STORAGE" means a long-term storage state for the unused product
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-369972-00-00
HVH-280-2/2S-HU
SPECIFICATION SHEET
2
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1
CL778-0504-0-00
△