HV9606
Initial Release
HV9606 Current-Mode PWM Controller with Supervisor
Features
General Description
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Synchronous Forward, Forward, and Flyback Controller
Lowest External Parts Count, Smallest Magnetics
Eliminates Bootstrap Transformer Winding
Supervisor Circuit Reduces Output Capacitance* up to 40%
Supervisor Circuit Functions as µP Supply Monitor and POR
15V to 250V Start-Up Regulator with START/STOP Control
<1mA Operating, <6µA Standby Input Current
VDD Powered Operation down to 2.9V
The HV9606 PWM controller allows the design of high efficiency
(>90%) power supplies for distributed board mounted power (BMP)
applications. Due to its high frequency capability it can provide
high currents (20A @ 3.3V) with small transformers and due to its
low internal operating voltage and current is also able to achieve
high efficiencies in low power applications.
Charge Pump Gate Drive Supply
The HV9606 utilizes fixed frequency current mode control with duty
cycle internally limited to <50%. It supports both isolated and non-
isolated topologies and provides all the necessary functions to
implement a flyback, forward or synchronous forward converter
with a minimum of external parts. Due to its low VDD operation the
bootstrap magnetic winding is eliminated in non-isolated
topologies. An on chip charge pump generates the gate drive
voltage for driving an external N-channel MOSFET and eliminates
the need for clamping by offering 250V immunity to high voltage
transients common in telecom and network systems. It conforms
to the requirements of IEEE 802.3 Powered Ethernet and ETR-080
ISDN specifications.
Programmable Soft Start
Under Voltage Lockout with Programmable Hysteresis
<50% Duty Cycle Operation
15kHz to 400kHz Fixed Frequency PWM Operation
Fault Tolerant Peer-to-Peer Synchronization
Precision !1% Band Gap Voltage Reference
Current Sense Leading Edge Blanking
Small SSOP-20 Footprint
*For short duration line loss, supervisor disables soft start if output
within tolerance when VIN returns and thus reduces holdup
requirements.
The oscillator is programmable and provides fault tolerant peer-to-
peer synchronization to other similar circuits or master clock. The
chip draws almost no current (<6µA @ VIN < 20V) until the
programmable START/STOP thresholds of the start-up regulator
are satisfied. It can also be powered via the VDD pin, rather than
the VIN pin, in the range of 2.9V to 5.5V.
Applications
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Powered Ethernet and VoIP Terminals
Cable Modems and Amplifiers
ISDN Network Terminations, Terminals and Adapters
Network Equipment
Other functions include leading edge current sense blanking,
programmable SOFT START, precision !1% band gap reference
and a SUPERVISOR CIRCUIT. The SUPERVISOR can provide
housekeeping functions such as µP supply monitoring and reset,
soft start inhibit for rapid restart on short duration input voltage
interruption. It also minimizes input and output capacitance
requirements.
Servers, PCs and Peripheral Equipment
Telecommunication Systems and Terminals
Distributed Board Mounted Power
Battery Backup Systems
Portable Power Applications
Automotive and Heavy Equipment
Typical Application Circuit
10W Non-Isolated 48V to 3.3V Flyback Converter
R3
R2
To uP
RESET
Pin.
C9
C2
1
2
VDD
STATUS
SENSE
20
19
Q1
START
3
4
STOP
Vin
FB
18
17
R1
C7
C8
R6
COMP
+48V
C4
T1
D1
5
6
7
REF
SS
NI
CA
CB
16
15
14
+3.3V
C10
R7
R8
R9
C3
R4
C6
C5
SYNC
RT
8
9
VX2
13
12
C1
R10
M1
SGND
PGND
GATE
10
CS
11
R5
GND
GND
To SYNC pin of other HV9606 PWMs.
1
4/15/2002-R.L2
Supertex, Inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 FAX: (408) 222-4895 www.supertex.com
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
