HV2809
Supertex inc.
Low Harmonic Distortion, 32-Channel,
High Voltage Analog Switch Relay Replacement IC
General Description
Features
The Supertex HV2809 is a low harmonic distortion, 32-channel, high
voltage analog switch integrated circuit (IC), designed for use in medical
ultrasound imaging systems as a probe selection relay replacement.
It serves as a 16PDT (16-pole, double throw) high voltage analog
switch array. The enable function allows the parts to be configured
as either a 2:1 or 4:1 multiplexer/demultiplexer. The HV2809 is a very
fast transducer multiplexer that consumes minimal power and emits
no audible noise.
► 32-channel high voltage analog switch
► 2:1 multiplexer/demultiplexer
► Enable control for all-OFF state
► 3.3 or 5.0V CMOS input logic level
► HVCMOS technology for high performance
► Very low quiescent power dissipation, 10µA
► Low parasitic capacitance
► DC to 50MHz analog signal frequency
► -60dB typical OFF-isolation at 5.0MHz
► CMOS logic circuitry for low power
► Excellent noise immunity
Using HVCMOS technology, this device combines high voltage bilateral
DMOS switches and low power CMOS logic to provide efficient control
of high voltage analog signals.
► Flexible operating supply voltages
► 56-Lead 8x8 QFN package
The device is suitable for various combinations of high voltage
supplies, e.g., VPP/VNN: +40V/-160V, +100V/-100V, and +160V/-40V.
Applications
The HV2809 comes in an 8.0mm x 8.0mm x 1.0mm, 56-Lead QFN
package. Compared to an electromechanical relay, it not only saves
considerable PCB area, but also saves on the PCB assembled height.
► Electromechanical relay replacement in
medical ultrasound probes.
Block Diagram
+3.3V
Output
VDD
Switches
1kΩ
SW0
Y01
0.1µF
Logic
SW1
A/B
Control
&
ENABLE
Level
Shifters
SW30
Y3031
SW31
GND
VNN
VPP
-100V
+100V
0.1µF
0.1µF
Doc.# DSFP-HV2809
NR010913
Supertex inc.
www.supertex.com