HV High Voltage Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for High Voltage Applications
FEATURES
• High voltage breakdown compared to
standard design
• High reliability serial electrode design
• Polymer termination available for intensive,
board flex requirements
• Protective surface coating may be required to
prevent surface arcing
• Excellent reliability and thermal shock performance
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors reduce MOSFET voltage spikes
• Filtering for switching power supplies
• For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Note
Electrical characteristics at +25 °C unless otherwise specified
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 3.3 nF
Voltage Range: 500 VDC to 5000 VDC
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 47 pF to 560 nF
Voltage Range: 500 VDC to 8000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
Dissipation Factor (DF):
2.5 % maximum at 1.0 VRMS and 1 kHz
0.1 % maximum at 1.0 VRMS and 1 MHz for value
1000 pF
0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF
Insulating Resistance:
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
applied test voltages
min. 120 % of rated voltage
Dielectric Strength Test:
applied test voltages
120 % of rated voltage
Revision: 15-Jul-2021
Document Number: 45228
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000