APPLICABLE STANDARD
IEC 61169-32
OPERATING
STORAGE
-55C TO +125C
-55C TO +85C
(95%RH MAX)
(95%RH MAX)
TEMPERATURE RANGE
TEMPERATURE RANGE
CHARACTERISTIC
IMPEDANCE
RATING POWER
PECULIARITY
50Ω ( 0 TO 65 GHz)
―――
W
APPLICABLE
CABLE
―――
―――
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CENTER CONTACT
OUTER CONTACT
4
2
m MAX.
m MAX.
×
×
×
×
×
×
×
×
100 mA MAX (DC OR 1000 Hz).
INSULATION RESISTANCE
VOLTAGE PROOF
5000 M MIN.
NO FLASHOVER OR BREAKDOWN.
500
.
V DC
500 V AC FOR 1 min.CURRENT LEAKAGE 2mA MAX.
FREQUENCY 0 TO 65 GHz.
VOLTAGE STANDING
WAVE RATIO
1
VSWR
VSWR
VSWR
1.2 MAX. (0 TO 30GHz)
1.4 MAX. (30 TO 60GHz)
×
×
TEST METHOD IS BACK TO BACK.
1.6 MAX.
(60 TO 65GHz)
INSERTION LOSS
dB MAX.
FREQUENCY
TO
GHz
-
-
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE
N MAX.
-
×
-
×
0
EXTRACTION FORCES
EXTRACTION GAUGE: φ0.495-0.005 [mm]
EXTRACTION FORCE
INSERTION FORCE
EXTRACTION FORCE
0.05 ~ 2 N MIN.
N MAX.
STEEL GAUGE.
INSERTION AND
MEASURED BY APPLICABLE CONNECTOR.
-
-
WITHDRAWAL FORCES
N MIN.
-
-
MECHANICAL OPERATION
1) CONTACT RESISTANCE:
500 TIMES INSERTIONS AND EXTRACTIONS.
CENTER CONTACT 6 mMAX.
×
-
OUTER CONTACT
4 mMAX.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
1) NO ELECTRICAL DISCONTINUITY OF
FREQUENCY 10 TO 2000 Hz
SINGLE AMPLITUDE 0.75 mm, 196 m/s2
1 s.
×
×
-
-
2) NO DAMAGE, CRACK AND LOOSENESS
AT 10 CYCLES FOR 3 DIRECTIONS.
980 m/s2 DIRECTIONS OF PULSE
AT 3 TIMES FOR 3 DIRECTIONS.
6
ms
OF PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT,CYCLIC
1) INSULATION RESISTANCE: 100 M MIN.
(AT HIGH HUMIDITY)
EXPOSED AT -10 TO +65 C, 90~96
TOTAL 10 CYCLES ( 240 h )
2
×
-
2) INSULATION RESISTANCE: 5000 M MIN.
(AT DRY)
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
TEMPERATURE –55 → -- → +125 → -- C
×
×
-
-
TIME
30 → 3
→
30 → 3 min.
UNDER 5 CYCLES.
CORROSION SALT MIST
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
.
VSWR CHARACTERISTIC SHALL BE MET
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
AH.MARUYAMA
CHECKED
DATE
1
DIS-D-00004506
NK.NINOMIYA
20191030
20181220
2
△
REMARK
RoHS COMPLIANT
APPROVED
MH.OGUSU
MH.OGUSU
1
NOTE
MEASUREMENT STATE OF BACK TO BACK
CHECKED
DESIGNED
DRAWN
20181220
20181219
20181219
PORT1
PORT2
AH.MARUYAMA
AH.MARUYAMA
UNLESS OTHERWISE SPECIFIED, REFER TO IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-380932-00-00
HV-R-SR2
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
2
△
1/1
CL338-0010-0-00
FORM HD0011-2-1