HT7K1201
1 Channel, 6.0V, Peak Current 1.3A H-Bridge Driver
Features
Applications
• 1 Channel H-bridge motor driver: low MOSFET
• Valve/Pump, electric locks and consumer toys
on-resistance: 0.5Ω (HS+LS)
• Wide VDD input voltage range of 1.8V to 6.0V
• Maximum 1.3A motor peak current
General Description
The HT7K1201 is a 1-channel H-bridge driver
with a maximum motor peak current of 1.3A. Its
outstanding low on-resistance characteristic results
in excellent output efficiency which is a major
advantage in battery powered systems. A simple two
input control pin structure is used to provide four
control modes: Forward, Reverse, Brake and Standby
modes. With a PWM input control frequency of up to
200kHz, accurate speed control can be implemented
for a wide variety of applications. A full range of
protection functions are integrated including OCP,
OSP and OTP to prevent device damage even if the
motor stalls or experiences a short circuit in critical
operating environments. As the automatic sleep period
activation mechanism uses the same mode control
pins, an additional extra shutdown signal is not
required. In addition, an ultra-low 0.1μA sleep period
current ensures long battery life.
• Four operation modes: Forward, Reverse, Brake
and Standby
• Low sleep current < 0.1μA
• Sleep period activation mechanism
♦
Automatically entering sleep period by resetting
both IN1 and IN2 pins for over 10ms
• Up to 200kHz PWM input control operation
• Protection features
♦
VDD under voltage lock-out
♦
Over current protection
♦
Thermal shutdown protection
♦
Output short circuit protection
• Package type: 6-pin SOT23
• Operation temperature range: -40oC to +85oC
Typical Application Circuits
VDD
VDD
1.8V to 6V
*Pull down Resistor
OUT1
OUT1
IN1
HT7K1201
*CM
M
R2
*C1
*ZD1
Controller
IN2
OUT2
R3
OUT2
GND
* Zener diode is optional.
GND
Rev. 1.40
1
June 19, 2020