HT48R30A-1/HT48C30-1
I/O Type 8-Bit MCU
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
-
-
-
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0004E HT48 & HT46 MCU UART Software Implementation Method
HA0013E HT48 & HT46 LCM Interface Design
HA0021E Using the I/O Ports on the HT48 MCU Series
HA0055E 2^12 Decoder (8+4 - Corresponds to HT12E)
Features
·
·
·
·
Operating voltage:
96´8 data memory RAM
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
Buzzer driving pair and PFD supported
HALT function and wake-up feature reduce power
consumption
·
·
·
·
Low voltage reset function
25 bidirectional I/O lines (max.)
1 interrupt input shared with an I/O line
·
·
4-level subroutine nesting
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
8-bit programmable timer/event counter with overflow
interrupt and 8-stage prescaler
·
·
·
·
·
Bit manipulation instruction
·
On-chip RC oscillator, external crystal and RC oscil-
lator
14-bit table read instruction
63 powerful instructions
·
·
·
32768Hz crystal oscillator for timing purposes only
Watchdog Timer
All instructions in one or two machine cycles
24/28-pin SKDIP/SOP package
2048´14 program memory ROM
General Description
The HT48R30A-1/HT48C30-1 are 8-bit high perfor-
mance, RISC architecture microcontroller devices spe-
cifically designed for multiple I/O control product
applications. The mask version HT48C30-1 is fully pin
and functionally compatible with the OTP version
HT48R30A-1 device.
The advantages of low power consumption, I/O flexibil-
ity, timer functions, oscillator options, HALT and
wake-up functions, watchdog timer, buzzer driver, as
well as low cost, enhance the versatility of these devices
to suit a wide range of application possibilities such as
industrial control, consumer products, subsystem con-
trollers, etc.
Rev. 2.00
1
April 24, 2009