HT46RU26/HT46CU26
A/D Type 8-Bit MCU with UART
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
-
-
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0049E Read and Write Control of the HT1380
HA0052E Microcontroller Application - Battery Charger
HA0075E MCU Reset and Oscillator Circuits Application Note
Features
·
·
·
·
Operating voltage:
16-level subroutine nesting
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
8-channel 12-bit resolution A/D converter
4-channel 8-bit PWM outputs shared with
I/O lines
·
·
·
·
·
·
·
·
·
·
48 bidirectional I/O lines
External interrupt input shared with I/O line
Single 8-bit Timer/Event Counter
Two 16-bit Programmable Timer/Event Counters
32K ´16 Program Memory in 4 banks
768 ´ 8 byte Data Memory in 4 banks
Integrated Crystal and RC oscillators
Watchdog Timer function
·
·
Real Time Clock with 8-bit prescaler
Universal Asynchronous Receiver Transmitter -
UART
I2C Bus slave function
·
·
·
·
·
·
SPI Bus
Bit manipulation instructions
Table read instructions
63 powerful instructions
PFD for audio frequency generation
Power down and wake-up functions to reduce power
consumption
All instructions executed in one or two machine
cycles
·
·
·
Low voltage reset function
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
48/56-pin SSOP package types
General Description
The HT46RU26/HT46CU26 is an 8-bit high perfor-
mance RISC architecture microcontrollers, designed
especially for applications that interface directly to ana-
log signals, such as those from sensors.
I2C interfaces, a convenient means is provided for easy
and efficient interfacing to external personal computers
or other external hardware.
The benefits of these combined integrated functions, in
addition to low power consumption, high performance,
I/O flexibility and low-cost, provide these devices with
the versatility to suit a wide range of application possibil-
ities such as sensor signal processing, motor driving, in-
dustrial control, consumer products, subsystem
controllers, etc.
The device includes an integrated multi-channel Analog
to Digital Converter in addition to four Pulse Width Mod-
ulator outputs. The usual Holtek MCU features such as
power down and wake-up functions, oscillator options,
programmable frequency divider, etc. combine to en-
sure user applications require a minimum of external
components.
The HT46CU26 is under development and will be avail-
able soon.
With a fully integrated UART function and both SPI and
Rev. 1.00
1
June 12, 2008