HT46R51/HT46R52
A/D Type 8-Bit OTP MCU
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
-
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0004E HT48 & HT46 MCU UART Software Implementation Method
HA0084E NiMH Battery Charger Demo Board - Using the HT46R52
Features
·
·
·
·
·
·
·
·
Low-power fully static CMOS design
Operating voltage:
On-chip crystal and RC oscillator
6-level subroutine nesting
Watchdog Timer
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
Low voltage reset function
HALT function
·
Program Memory:
1K´14 OTP (HT46R51)
2K´14 OTP (HT46R52)
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
·
·
Data memory: 88´8 RAM
·
·
·
·
·
·
·
1-channel 8-bit PWM output shared with an I/O line
PFD function
A/D converter: 12bits´5Ch
External A/D converter reference voltage input pin
Bit manipulation instruction
·
·
·
14 bidirectional I/O lines
Table read instruction
1 interrupt input shared with an I/O line
63 powerful instructions
8-bit programmable timer/event counter with over-
flow interrupt and 7-stage prescaler
All instructions in one or two machine cycles
18-pin DIP, 20-pin SOP/SSOP package
General Description
The HT46R51/HT46R52 are 8-bit high performance,
RISC architecture microcontroller devices specifically
designed for A/D applications that interface directly to
analog signals, such as those from sensors. The advan-
tages of low power consumption, I/O flexibility, timer
functions, oscillator options, multi-channel A/D con-
verter, Pulse Width Modulation function, HALT and
wake-up functions, watchdog timer, as well as low cost,
enhance the versatility of these devices to suit a wide
range of A/D application possibilities such as sensor
signal processing, chargers, motor driving, industrial
control, consumer products, subsystem controllers, etc.
Rev. 1.40
1
July 12, 2005