HT46R232
A/D Type 8-Bit OTP MCU
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
-
-
HA0005E Controlling the I2C bus with the HT48 & HT46 MCU Series
HA0013E HT48 & HT46 LCM Interface Design
HA0017E Controlling the Read/Write Function of the HT24 Series EEPROM Using the HT49 Series MCUs
Features
·
·
Operating voltage:
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
·
·
·
8-level subroutine nesting
·
·
·
40 bidirectional I/O lines (max.)
8 channels 10-bit resolution A/D converter
1 interrupt input shared with an I/O line
4-channel 8-bit PWM output shared with
four I/O lines
Two 16-bit programmable timer/event counter with
overflow interrupt
·
·
·
·
·
·
·
Bit manipulation instruction
·
·
·
·
·
·
On-chip crystal and RC oscillator
Watchdog Timer
16-bit table read instruction
63 powerful instructions
4096´16 program memory
192´8 data memory RAM
Supports PFD for sound generation
All instructions in one or two machine cycles
Low voltage reset function
I2C Bus (slave mode)
HALT function and wake-up feature reduce power
consumption
28-pin SKDIP/SOP, 48-pin SSOP packages
General Description
The HT46R232 are 8-bit, high performance, RISC ar-
chitecture microcontroller devices specifically designed
for A/D applications that interface directly to analog sig-
nals, such as those from sensors.
Width Modulation function, I2C interface, HALT and
wake-up functions, enhance the versatility of these de-
vices to suit a wide range of A/D application possibilities
such as sensor signal processing, motor driving, indus-
trial control, consumer products, subsystem controllers,
etc.
The advantages of low power consumption, I/O flexibil-
ity, programmable frequency divider, timer functions,
oscillator options, multi-channel A/D Converter, Pulse
I2C is a trademark of Philips Semiconductors.
Rev. 1.20
1
July 13, 2005