HS-508BRH
®
Data Sheet
August 11, 2009
FN4824.2
Radiation Hardened 8 Channel CMOS
Analog Multiplexer with Overvoltage
Protection
Features
• Electrically Screened to SMD # 5962-96742
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Environment
The HS-508BRH is a dielectrically isolated, radiation
hardened, CMOS analog multiplexer incorporating an
important feature; it withstands analog input voltages much
greater than the supplies. This is essential in any system
where the analog inputs originate outside the equipment.
They can withstand a continuous input up to 10V greater than
either supply, which eliminates the possibility of damage when
supplies are off, but input signals are present. Equally
important, it can withstand brief input transient spikes of
several hundred volts; which otherwise would require complex
external protection networks. Necessarily, ON resistance is
somewhat higher than similar unprotected devices, but very
low leakage current combine to produce low errors.
5
- Gamma Dose (γ) . . . . . . . . . . . . . . . . . 3 x 10 Rad (Si)
- Dielectrically Isolated Device Islands
2
- SEP >100 Mev-mg/cm
• Analog/Digital Overvoltage Protection
• ESD Rated to 3kV
• Fail Safe with Power Loss (No Latchup)
• Break-Before-Make Switching
• (Typ) DTL/TTL and CMOS Compatible Threshold
• Analog Signal Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
• Fast Access Time
Reference Application Notes 520 and 521 for further
information on the HS-508BRH multiplexer in general.
• Supply Current at 1MHz Address Toggle. . . . . .4mA (Typ)
• Standby Power. . . . . . . . . . . . . . . . . . . . . . . .7.5mW (Typ)
• Pb-Free (RoHS Compliant)
The HS-508BRH has been specifically designed to meet
exposure to radiation environments. Operation from -55°C to
+125°C is guaranteed.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-96742. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/spacedefense/newsafclasst.asp
Ordering Information
ORDERING NUMBER
(Note)
INTERNAL
MKT. NUMBER
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PART MARKING
Q 5962F96 74202QEC
Q 5962F96 74202QXC
Q 5962F96 74202VEC
Q 5962F96 74202VXC
HS1- 508BRH /PROTO
HS9- 508BRH /PROTO
PKG. DWG.
D16.3
5962F9674202QEC
5962F9674202QXC
5962F9674202VEC
5962F9674202VXC
HS1-508BRH/PROTO
HS9-508BRH/PROTO
HS1-508BRH-8
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
16 Ld SBDIP
HS9-508BRH-8
16 Ld FLATPACK
16 Ld SBDIP
K16.A
D16.3
K16.A
D16.3
K16.A
HS1-508BRH-Q
HS9-508BRH-Q
16 Ld FLATPACK
16 Ld SBDIP
HS1-508BRH/PROTO
HS9-508BRH/PROTO
16 Ld FLATPACK
NOTE: These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible
with both SnPb and Pb-free soldering operations.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners