HS-5104ARH-T
Data Sheet
July 1999
File Number 4606.1
Radiation Hardened Low Noise Quad
Operational Amplifier
Features
• QML Class T, Per MIL-PRF-38535
Intersil‘s Satellite Applications FlowTM (SAF) devices are
fully tested and guaranteed to 100kRAD total dose. These
QML Class T devices are processed to a standard flow
intended to meet the cost and shorter lead-time needs of
large volume satellite manufacturers, while maintaining a
high level of reliability.
• Radiation Performance
5
- Gamma Dose (γ) 1 x 10 RAD(Si)
- No Latch-Up, Dielectrically Isolated Device Islands
• Low Noise
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . 4.3nV/√Hz (Typ)
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . 0.6pA/√Hz (Typ)
The HS-5104ARH-T is a radiation hardened, monolithic
quad operational amplifier that provides highly reliable
performance in harsh radiation environments. Its excellent
noise characteristics coupled with a unique array of dynamic
specifications make this amplifier well-suited for a variety of
satellite system applications. Dielectrically isolated, bipolar
processing makes this device immune to Single Event
Latch-up.
• Low Offset Voltage . . . . . . . . . . . . . . . . . . . . 3.0mV (Max)
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 2.0V/µs (Typ)
• Gain Bandwidth Product . . . . . . . . . . . . . . . 8.0MHz (Typ)
Pinouts
HS1-5104ARH-T (SBDIP), CDIP2-T14
TOP VIEW
The HS-5104ARH-T shows almost no change in offset
voltage after exposure to 100K RAD(Si) gamma radiation,
with only a minor increase in current. Complementing these
specifications is a post radiation open loop gain in excess of
40K.
1
2
3
4
5
6
7
14
13
12
11
10
9
OUT 4
-IN4
OUT 1
-IN1
+IN4
V-
+IN1
V+
This quad operational amplifier is available in an industry
standard pinout, allowing for immediate interchangeability
with most other quad operational amplifiers.
+IN3
-IN3
+IN2
-IN2
Specifications
8
OUT 3
OUT 2
Specifications for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed below must be used when ordering.
HS9-5104ARH-T (FLATPACK), CDFP3-F14
Detailed Electrical Specifications for the HS-5104ARH-T
are contained in SMD 5962-95690. A “hot-link” is provided
from our website for downloading.
TOP VIEW
1
2
3
4
5
6
7
14
13
12
11
10
9
OUT 1
-IN1
OUT 4
-IN4
www.intersil.com/spacedefense/newsafclasst.asp
+IN1
V+
+IN4
V-
Intersil‘s Quality Management Plan (QM Plan), listing all
Class T screening operations, is also available on our
website.
+IN2
-IN2
+IN3
-IN3
www.intersil.com/quality/manuals.asp
OUT 2
8
OUT 3
Ordering Information
TEMP.
ORDERING
NUMBER
PART
NUMBER
RANGE
( C)
o
5962R9569001TCC
HS1-5104ARH/Proto
5962R9569001TXC
HS9-5104ARH/Proto
HS1-5104ARH-T
-55 to 125
-55 to 125
-55 to 125
-55 to 125
HS1-5104ARH/Proto
HS9-5104ARH-T
HS9-5104ARH/Proto
NOTE: Minimum order quantity for -T is 150 units through
distribution, or 450 units direct.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1
Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation.