HS-1412RH
Data Sheet
August 1999
File Number 4230.1
Radiation Hardened, Quad, High Speed,
Low Power, Video Closed Loop Buffer
Features
• Electrically Screened to SMD # 5962-96834
• QML Qualified per MIL-PRF-38535 Requirements
• MIL-PRF-38535 Class V Compliant
The HS-1412RH is a radiation hardened quad closed loop
buffer featuring user programmable gain and high speed
performance. Manufactured on Intersil’s proprietary
complementary bipolar UHF-1 (DI bonded wafer) process,
this device offers wide -3dB bandwidth of 340MHz, very fast
slew rate, excellent gain flatness and high output current.
These devices are QML approved and are processed and
screened in full compliance with MIL-PRF-38535.
• User Programmable For Closed-Loop Gains of +1, -1 or
+2 Without Use of External Resistors
• Standard Operational Amplifier Pinout
• Low Supply Current . . . . . . . . . . . . 5.9mA/Op Amp (Typ)
• Excellent Gain Accuracy . . . . . . . . . . . . . . . 0.99V/V (Typ)
• Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . .340MHz (Typ)
• Fast Slew Rate . . . . . . . . . . . . . . . . . . . . . .1155V/µs (Typ)
• High Input Impedance . . . . . . . . . . . . . . . . . . . 1MΩ (Typ)
• Excellent Gain Flatness (to 50MHz). . . . . . ±0.02dB (Typ)
• Fast Overdrive Recovery . . . . . . . . . . . . . . . . <10ns (Typ)
• Total Gamma Dose. . . . . . . . . . . . . . . . . . . . 300kRAD(Si)
• Latch Up. . . . . . . . . . . . . . . . . . . . . None (DI Technology)
A unique feature of the pinout allows the user to select a
voltage gain of +1, -1, or +2, without the use of any external
components. Gain selection is accomplished via
connections to the inputs, as described in the “Application
Information” section. The result is a more flexible product,
fewer part types in inventory, and more efficient use of board
space.
Compatibility with existing op amp pinouts provides flexibility
to upgrade low gain amplifiers, while decreasing component
count. Unlike most buffers, the standard pinout provides an
upgrade path should a higher closed loop gain be needed at
a future date.
Applications
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
• Flash A/D Driver
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Imaging Systems
Detailed Electrical Specifications for these devices are
contained in SMD 5962-96834. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
Ordering Information
Pinout
INTERNAL
TEMP. RANGE
o
HS-1412RH (CERDIP) GDIP1-T14
ORDERING NUMBER
5962F9683401VCA
5962F9683401VCC
MKT. NUMBER
( C)
OR
HS1-1412RH-Q
HS1B-1412RH-Q
-55 to 125
-55 to 125
HS-1412RH (SBDIP) CDIP2-T14
TOP VIEW
OUT1
-IN1
1
2
3
4
5
6
7
14 OUT4
13 -IN4
12 +IN4
11 V-
+IN1
V+
+IN2
-IN2
10 +IN3
9
8
-IN3
OUT3
OUT2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1