Coil Components (SMD)
MC-200SC and MC-200SD Series
ꢀFeatures
1.Excellent High Frequency Characteristics
Insertion loss: 0.6 dB TYP.
Phase balance: 3deg TYP.
MC-201SC
MC-201SD
MC-212SC
MC-211SD
MC-217SC
MC-212SD
MC-218SC
MC-213SD
2.Highly Reliable Design
PPS resin is used for the exterior cladding of the
cover, glass epoxy substrate is used for the board
material, and solder plating is used for the electrodes.
All these factors contribute to excellent mechanical
strength, heat resistance, and soldering qualities
3.Suited to Automatic Mounting
Embossed tape packaging permits automatic mounting.
(Individual delivery can also be accommodated.)
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
30 to 370 MHz
50 ohms, 75 ohms
0.5 W
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Ratings
Note: The frequency range and the characteristic impedance will differ depending on the products.
Item
Standard
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s for 4 hours in each of 3 directions
1.Vibration
2.Shock
2
2
Acceleration of 294 m/s , sine half-wave waveform, 3 cycles in each of the 3 axis
No damage, cracks, or parts dislocation
(-60 to 55ç: 30 min. ꢀ 20 to 35ç: 15 min.
ꢀ 125 to 128ç: 30 min. ꢀ 20 to 35ç: 15 min.)
for 100 cycles
3.Temperature cycle
4.Corrosion resistance
No serious corrosion
Exposed to 5% salt water solution for 48 hours
The test method conforms to MIL-STD-202.
ꢀ
ꢀMaterials
ꢀExternal Dimensions
Part
Material
Glass epoxy
PPS
Finish
Solder plating
-----------
Board
Cover
ꢀOrdering Information
input
MC - 2 0 1 S C
1
2
3
4
5
6
Series Name: MC
Suffix
1
2
4
5
Number of Divisions
Board Mounting Method
S : SMT type
Indicated by number of divisions of output.
Phase Difference
Characteristic Impedance
C : 75 ohms
3
6
Indicated by phase difference of output.
0 : 0°
1 : 90°
D : 50 ohms
The contact numbers
are common for both the
ꢀ
0° type and the 90° type.
46