Single Slot Connector for PC Card Type III
IC7 Series
ꢀFeatures
1. PC Card Standard compliant:
Type I, type II and type III cards are covered. Terminals for
grounding are provided.
2. Space saving and Lightweight
Connector height is minimized to 5.4mm, and weight is 12.5g.
3. Eject mechanism
Hirose's unique ejection mechanism provides an higher degree of
card ejection over existing products.
ꢀProduct Specifications
Current rating 0.5 A
Operating temperature range -55ç to +85ç (Note 1)
Storage temperature range -40ç to +70ç (Note 2)
Rating
Voltage rating 125V AC
Operating humidity range Relative humidity 95% max. Storage humidity range Relative humidity 40% to 70%
(No condensation)
Item
1.Insulation resistance
2.Withstanding voltage No flashover or insulation breakdown
Specification
Conditions
1000 M ohms min.
500 V DC
500 V AC / 1 minute
1mA
3.Contact resistance
40 m ohms max. (Initial value)
Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or
acceleration of 147m/s , 4 hours in each of the 3 directions
4.Vibration
No electrical discontinuity of 100ns or more
2
5.Humidity (Steady state) Insulation resistance: 100 M ohms min.
6.Temperature cycle No damage, cracks, or parts looseness
96 hours at temperature of 40ç and humidity of 90% to 95%
Temperature: -55ç ꢀ +15ç to +35ç ꢀ +85ç ꢀ +15ç to +35ç
Time: 30 ꢀ 5 max. ꢀ 30 ꢀ 5 max. (Minutes) 5 cycles
7.Durability (insertion/ withdrawal) Contact resistance: 20 m ohms max. from initial value
8.Resistance to soldering heat No deformation of the insulator parts affecting performance
10000 cycles at 400 to 600 cycles per hous
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterial
Part
Material
PBT
Finish
Color: Black
Remarks
UL94V-0
UL94V-0
----------
Connector
Eject Button
Insulator
Contact
PA
Color: Black
Contact area: gold plating
Lead area: Solder plating
Gold plating
Connector
Brass
----------
Terminals for grounding
Eject metal fitting
Locking pins
Phosphor bronze
Stainless steel
Phosphor bronze
Steel
----------
----------
----------
Solder plating
----------
Nuts
Nickel plating
----------
A56