Applicable standard
Operating
Storage
-40 °C to +90 °C ( 90 %RH Max.)
-40 °C to +90 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 6 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
10 mA Max.(DC or 1000 Hz)
Center contact 14 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 14 mΩ Max.
500 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
100 V DC.
200 V AC for 1 min. current leakage 2 mA Max.
No flashover or breakdown.
Frequency 0 to 6 GHz.
Frequency - to - GHz.
VSWR 1.2 Max.
--- dB Max.
X
-
-
Insertion loss
-
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ 0.9017
by steel gauge.
Insertion force
Extraction force 0.3 N Min.
Insertion force --- N Max.
--- N Max.
-
X
-
-
-
X
-
-
-0.0025
Measured by applicable connector.
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
[HRM] 500 times insertion and extractions.
[U.FL] 30 times insertion and extractions.
Center contact 21 mΩ Max.
X
-
Outer contact 21 mΩ Max.
2)No damage, crack and looseness of parts.
1)No electrical discontinuity of 1 μs.
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 100 Hz single amplitude 1.5 mm,
59 m/s2 at 5 cycles for 3 directions.
X
X
-
-
735 m/s2 directions of pulse 11 ms
at 3 times for 6 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +40 °C, 95 %
total --- cycles.( 96 h)
1)Insulation resistance: 10 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature -40 → 5-35 → +90 → 5-35 °C
Time
30 →
3 →
30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
No heavy corrosion.
(The quality is judged by VSWR performance)
Count
Description of revisions
Designed
Checked
Date
0
△
KY.SHIMIZU
TO.KATAYAMA
RO.YOKOYAMA
RO.YOKOYAMA
16.08.23
16.08.23
16.08.22
16.08.22
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-349747-00-00
HRMJ-U.FLJ-PA4
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL311-0465-2-00
△
FORM HD0011-2-1