Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω ( 0 to 8 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max. (DC or 1000 Hz)
Center contact 14 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 7 mΩ Max.
1000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
250 V DC.
250 V AC for 60 sec current leakage 2 mA Max.
Frequency 0 to 6 GHz.
Frequency 6 to 8 GHz.
Frequency - to - GHz.
No breakdown.
VSWR 1.2 Max.
VSWR 1.3 Max.
- dB Max.
X
-
-
-
Insertion loss
MECHANICAL CHARACTERISTICS
+0.005
0.91
by steel gauge. (HRM)
Contact insertion and
φ
Insertion force
Extraction force 1.5 N Min.
Insertion force - N Max.
Extraction force 0.2 N Min.
Insertion force - N Max.
- N Max.
-
X
-
X
-
-
X
-
X
-
+0
extraction forces
-0
0.3
by steel gauge. (ML51)
φ
-0.005
Insertion and
Measured by applicable connector. (ML51)
200 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force 5 N Min.
1)Contact resistance:
X
X
Center contact 21 mΩ Max.
Outer contact 11 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
-
-
X
X
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles. ( 240 h)
1)Insulation resistance: - MΩ Min.
(at high humidity)
2) Insulation resistance: 100 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.2 Max. (Frequency 0 to 6 GHz.)
VSWR 1.3 Max. (Frequency 6 to 8 GHz.)
Count
0
Description of revisions
Designed
Checked
Date
NK.NINOMIYA
NK.NINOMIYA
NK.OOSAWA
NK.OOSAWA
20230713
20230713
20230713
20230713
Remark
Approved
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-134882-41-00
SPECIFICATION SHEET
HRM.J-ML51.P-A(41)
CL0311-0317-5-41
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1