Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-40 °C to +50 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
50 Ω( 0 to 12 GHz)
-- W
----
Rating Power
1
0.085 inch semi-flexible cable
Peculiarity
(Recommend : FCCAF1,TF-MMF(1/0.511))
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
X
X
X
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 4 mΩ Max.
Outer contact 4 mΩ Max.
1000 MΩ Min.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 3 GHz.
Frequency 3 to 6 GHz.
Frequency 6 to 12 GHz.
Frequency - to - GHz.
No flashover or breakdown.
VSWR 1.2 Max.
VSWR 1.3 Max.
VSWR 1.35 Max.
--- dB Max.
X
-
-
-
1
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ - by steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force --- N Max.
--- N Max.
-
-
-
-
-
-
-
-
Measured by applicable connector.
1000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
Center contact 6 mΩ Max.
Outer contact 6 mΩ Max.
2)No damage, crack and looseness of parts.
X
-
Vibration
Shock
Frequency 10 to 2000 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
196 m/s2 at 4 hours for 3 directions.
1960 m/s2 directions of pulse 6 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
49 N Min.
X
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-65 → - → +125 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min.
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
1
VSWR 1.2 Max. (Frequency 0 to 3 GHz.)
VSWR 1.3 Max. (Frequency 3 to 6 GHz.)
VSWR 1.35 Max. (Frequency 6 to 12 GHz.)
Count
Description of revisions
DIS-D-00003444
Designed
NK.OOSAWA
Checked
TO.KATAYAMA
Date
1
18.08.24
17.02.17
17.02.17
17.02.17
17.02.17
3
KY.SHIMIZU
TO.KATAYAMA
NK.OOSAWA
NK.OOSAWA
Remark
Approved
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-370052-00-00
SPECIFICATION SHEET
HRM-200-SF085LPSG
CL323-0039-0-00
1
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1