Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 28 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 4 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 4 mΩ Max.
5000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
1000 V AC for 1 min. current leakage 2 mA Max.
0 to 18 GHz.
Frequency 18 to 20 GHz.
20 to 28 GHz.
No flashover or breakdown.
VSWR 1.4 Max.
VSWR 1.5 Max.
VSWR 1.7 Max.
--- dB Max.
X
-
-
-
Insertion loss
Frequency - to - GHz.
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ 0.9017 -0.0025 by steel gauge.
Measured by applicable connector.
500 times insertion and extractions.
Insertion force
Extraction force 0.3 N Min.
Insertion force --- N Max.
--- N Max.
-
X
-
-
-
-
-
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
-
Center contact 6 mΩ Max.
Outer contact 6 mΩ Max.
2)No damage, crack and looseness of parts.
X
-
Vibration
Shock
Frequency 10 to 2000 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
196 m/s2 at 12 cycles for 3 directions.
1960 m/s2 directions of pulse 6 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 5000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min.
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
No heavy corrosion.
(The quality is judged by VSWR performance)
Count
Description of revisions
Designed
Checked
Date
0
△
TO.KATAYAMA
TO.KATAYAMA
RO.YOKOYAMA
RO.YOKOYAMA
17.04.10
17.04.10
17.04.10
17.04.10
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT.
The coupling tightening torque: 0.6 to 0.8 N・m.
Attached screw and washer apply PCB thickness 0.7 to 2.65 mm.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC-339103-01-00
SPECIFICATION SHEET
Part No.
HRM(G)-300-468B-1(01)
△
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL323-0924-8-01
FORM HD0011-2-1