Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 3 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 4 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 4 mΩ Max.
5000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
1000 V AC for 1 min. current leakage 2 mA Max.
No flashover or breakdown.
Frequency 0 to 3 GHz.
Frequency - to - GHz.
VSWR 1.2 Max.
--- dB Max.
X
-
-
Insertion loss
-
MECHANICAL CHARACTERISTICS
Contact insertion and
+0.0025
0
Insertion gauge : φ0.9398
steel gauge.
steel gauge.
Insertion force
8.9 N Max.
X
X
X
X
extraction forces
0
Extraction gauge : φ0.9017
Extraction force 0.3 N Min.
Insertion force --- N Max.
-0.0025
Insertion and
Measured by applicable connector.
500 times insertion and extractions.
-
-
-
-
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
Center contact 6 mΩ Max.
Outer contact 6 mΩ Max.
2)No damage, crack and looseness of parts.
X
-
Vibration
Shock
Frequency 10 to 2000 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
196 m/s2 at 10 cycles for 3 directions.
1960 m/s2 directions of pulse 6 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
--- N Min.
of
-
mm/min. and record the strength at which
-
-
the cable or connector breaks.
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 5000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 → - °C
30 → 3 → 30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.2 Max.
Count
Description of revisions
Designed
Checked
Date
△
0
KY.SHIMIZU
TO.KATAYAMA
YI.FUNADA
16.05.16
16.05.16
16.05.16
16.05.16
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
The coupling tightening torque : 0.6 to 0.8 N・m
YI.FUNADA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-311724-00-00
HRM(G)-300-438B
SPECIFICATION SHEET
△
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL323-0877-0-00
FORM HD0011-2-1