APPLICABLE STANDARD
-25 C TO
+85 C
-10
C TO
+60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 30 V , DC 42 V
2 A
CURRENT
APPLICABLE CABLE
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
X
X
X
X
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
ELECTRIC CHARACTERISTICS
15 m MAX.
1000 M MIN.
X
X
X
X
X
X
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
CONTACT SHALL BE MEASURED AT DC
1
A
100
300
V DC.
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
WITHDRAWAL FORCES
BY STEEL GAUGE.
INSERTION AND WITHDRAWAL FORCES : - N MIN.
-
-
-
CONNECTOR INSERTION AND MEASURED BY APPLICABLE CONNECTOR.
WITHDRAWAL FORCES
INSERTION AND WITHDRAWAL FORCES
LOCKING DEVICE WITH UNLOCK
LOCKING DEVICE WITH LOCK
:
N MAX.
X
: 50 N MAX.
MECHANICAL OPERATION
CONTACT RESISTANCE:
30
m MAX.
1000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
VIBRATION
SHOCK
FREQUENCY: 10 → 55 → 10 (Hz) (1CYC,5min),
SINGLE AMPLITUDE 0.75 mm, AT 10 CYC, FOR 3 DIRECTIONS.
490 m/s2 DIRECTIONS OF PULSE 11 ms AT 3 TIMES
FOR 6 DIRECTIONS.
X
X
-
-
BREAKING STRENGTH(3)
MAX 30N SHALL BE APPLIED TO CABLE IN UP AND DOWN,
LEFT AND RIGHT DIRECTIONS WHEN MATED.
NO BREAKAGE MAX 30N.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 10 MΩ MIN
(AT HIGH HUMIDITY).
(STEADY STATE)
X
-
② INSULATION RESISTANCE: 100 MΩ MIN (AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 100 MΩ MIN.
② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
TIME 30 → 10 TO 15 → 30 → 10 TO 15 min
UNDER 5 CYCLES.
X
X
-
-
NO HEAVY CORROSION RUINS THE FUNCTION.
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
CORROSION SALT MIST
DRY HEAT
COLD
EXPOSED AT + 85 ℃ , 96 h.
EXPOSED AT - 55 ℃ , 96 h.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
RESISTANCE TO SOLDERING SOLDER TEMPERATURE, + 350±10℃, FOR SOLDERING
NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
X
X
-
-
HEAT
DURATION, 3 TO 4 s.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, + 350±10℃ FOR
SOLDERING DURATION, 2 TO 3 s.
WETTING ON SOLDER SURFACE,NO SOLDER CLUSTER.
SEALING
EXPOSED AT A DEPTH OF 1 m FOR 0.5 h.
NO WATER PENETRATION INSIDE CONNECTOR.
X
X
-
-
AIRTIGHTNESS
APPLY AIR PRESSURE 17.6kPa FOR 0.5min TO INSIDE CONNECTOR. NO AIR BUBBLES INSIDE CONNECTOR.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
NOTE (1) R/T : ROOM TEMPERATURE
APPROVED
CHECKED
DESIGNED
DRAWN
HY.KOBAYASHI
18.02.26
HY.KOBAYASHI
DS.MATSUNE
18.02.26
18.02.24
18.02.22
AI.NISHIYAMA
Unless otherwise specified, refer to IEC 60512(JIS C5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-113453-31-00
HR30-7R-12P(31)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL130-1016-6-31
FORM HD0011-2-1