APPLICABLE STANDARD
-15 C TO +60 C
-10 C TO +60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 100 V , DC 140 V
2 A
CURRENT
APPLICABLE CABLE
φ6 mm
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
MARKING
ELECTRIC CHARACTERISTICS
X
X
X
X
45
60
m MAX.
m MAX.
M MIN.
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
-
-
-
-
GROUND SHALL BE MEASURED AT DC
1
A
200
INSULATION RESISTANCE
VOLTAGE PROOF
250
300
V DC.
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
BY STEEL GAUGE.
INSERTION AND WITHDRAWAL FORCES : - N MIN.
-
-
-
WITHDRAWAL FORCES
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
INSERTION AND WITHDRAWAL FORCES : 5 TO 100 N.
X
CONTACT RESISTANCE:
GROUND RESISTANCE:
50
70
m MAX.
m MAX.
MECHANICAL OPERATION
1000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
X
-
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
20 N MIN.
VIBRATION
FREQUENCY: 10 TO 55 Hz,SINGLE AMPLITUDE 0.75 mm,
m/s2 AT 2h, FOR 3 DIRECTIONS.
SHOCK
490 m/s2 DURATIONS OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
X
X
-
-
CONTACT RETENTION FORCE
APPLYING A PULL FORCE THE WIRE AFTER THE APPLICABLE
CRIMPED CONTACT IS ASSEMBLED THE BODY.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 2 MΩ MIN
(AT HIGH HUMIDITY).
X
X
-
-
(STEADY STATE)
② INSULATION RESISTANCE: 20 MΩ MIN
(AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 200 MΩ MIN..
② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -15→ R/T(1) → +60 → R/T ℃
TIME 30 → 10 TO 15 → 30 → 10 TO 15 min
UNDER 5 CYCLES.
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
EXPOSED AT + 60 ℃,96 h.
CORROSION SALT MIST
NO HEAVY CORROSIN RUIN THE FUNCTION.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
DRY HEAT
COLD
EXPOSED AT - 15 ℃,96 h.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
EJ.KUNII
EJ.KUNII
18.09.18
18.09.18
18.09.18
NOTE(1) R/T:ROOM TEMPERATURE
(2) ABOVE SPECIFICATIONS SHOWS THE VALUES IN ASSEMBLED CONDITION WITH
APPLICABLE CRIMP CONTACTS.
TY.TAKAHASHI
DRAWN
TY.TAKAHASHI
18.09.18
Unless otherwise specified, refer to IEC60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-379317-00-00
HR212-14P-20PC
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
CL112-1112-0-00
△
FORM HD0011-2-1