HR1200
High-Performance
Digital PFC+LLC Combo Controller
The Future of Analog IC Technology
PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE
FEATURES
DESCRIPTION
•
Meets EuP Lot 6 and COC Version 5 Tier 2
Specifications
The HR1200 integrates a digital PFC controller
and a half-bridge resonant controller into a
single chip. It uses very low power at no-load or
ultra-light load, making it compliant with Energy
Using Product Directive (EuP) Lot 6 and Code
of Conduct Version 5 Tier 2 specifications.
•
•
HV Current Source for Start-Up
Smart X-Cap Discharger when AC is
Removed
•
•
•
•
Standard I2C Interface
1K EEPROM to Store Parameters
User-Friendly GUI for Digital PFC
High Efficiency from Light Load to Full Load
by CCM/DCM Multi-Mode Control
High PF Due to Patented Input Capacitor
Current Compensation
The PFC of the HR1200 employs a patented
average current control scheme, which can
operate in CCM and DCM multi-mode
according to the instantaneous condition of the
input voltage and output load. The IC exhibits
excellent efficiency and high PF at light load.
When operating in CCM, the controller can be
used in applications up to 500W with minimal
board size limitations. The performance of the
PFC can be optimized by programming multiple
parameters through an I2C GUI. Programming
is completed either by the factory or by the
customer using a detailed user guide.
•
•
•
•
•
•
•
•
Programmable Frequency Jittering
Programmable Brown-In and Brown-Out
Programmable Soft Start
Cycle-by-Cycle Current Limit
Open-Loop Protection
LLC Controller
600V High-Side Gate Driver with Integrated
Bootstrap Diode and High dV/dt Immunity
Adaptive Dead-Time Adjustment of HB LLC
with Minimum and Maximum Limit
Burst Mode Switching
Safe Start-Up in Case of Fault
Two-Level Over-Current Protection (OCP)
Latch Shutdown Protection
UTE
The half-bridge LLC converter achieves high
efficiency with zero-voltage switching (ZVS).
The HR1200 implements an adaptive dead-time
adjustment (ADTA) function, so the LLC
converter can achieve easily ZVS from heavy
load to light load. In addition, the HR1200 can
prevent the LLC converter from operating in
capacitive mode, making it more robust and
easier to design.
•
•
•
•
•
•
•
Over-Temperature Protection (OTP)
Capacitance Mode Protection
The HR1200 integrates a high-voltage (HV)
current source inside the IC for start-up,
• APPLICATIONS
•
Notebook Adapters
All-in-One or Gaming Power Supply
Desktop PC and ATX Power
General AC/DC Power Supply up to 600W
LCD TV and Plasma TV Power Supply
MPS CONFIDENTIAL
eliminating the traditional start-up resistor or
T DISTRIB
•
•
•
•
external circuit. When the AC input is removed,
the HV current source functions as an X-cap
discharger, eliminating the need for a resistor
for X-cap discharging. These features reduce
the size of the BOM list and power consumption
at no load.
MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under quality assurance. “MPS”
and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
Full protection features include thermal
shutdown, over-current protection (OCP), over-
voltage protection (OVP), and brown-in/brown-
out protection.
Analog digital adaptive modulation (ADAM) and advanced asynchronous
mode (AAM) are trademarks of Monolithic Power Systems, Inc.
HR1200 Rev 0.8
12/11/2015
Preliminary Specifications Subject to Change
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
1
© 2015 MPS. All Rights Reserved.