APPLICABLE STANDARD
-25 C TO
+85 C
-10
C TO
+60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 100 V , DC 140 V
2 A
CURRENT
APPLICABLE CABLE
φ9
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
X
X
X
X
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
ELECTRIC CHARACTERISTICS
10 m MAX.
X
X
X
X
X
X
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
1000 M MIN.
INSULATION RESISTANCE
100
300
V DC.
VOLTAGE PROOF
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION AND WITHDRAWAL FORCES :
BY STEEL GAUGE.
0 .53 0 .003
X
X
-
-
WITHDRAWAL FORCES
0.15 N MIN.
INSERTION AND WITHDRAWAL FORCES
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
LOCKING DEVICE WITH LOCK
CONTACT RESISTANCE: 15
: 70 N MAX.
m MAX.
MECHANICAL OPERATION
1000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
VIBRATION
FREQUENCY: 10 TO 55 Hz,SINGLE AMPLITUDE 0.75 mm,
m/s2 AT 2h, FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
SHOCK
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
X
X
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 5 MΩ MIN
(AT HIGH HUMIDITY).
(STEADY STATE)
② INSULATION RESISTANCE: 50 MΩ MIN
(AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 1000 MΩ MIN..
② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
TIME 30 → 10 TO 15 → 30 → 10 TO 15 min
UNDER 5 CYCLES.
X
-
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
EXPOSED AT + 85 ℃,96 h.
CORROSION SALT MIST
DRY HEAT
NO HEAVY CORROSION RUIN THE FUNCTION.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
COLD
EXPOSED AT - 55 ℃,96 h.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
RESISTANCE TO SOLDERING
HEAT
SOLDER TEMPERATURE, + 380±10℃, FOR SOLDERING
NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
DURATION, 3 TO 4 s.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, + 350±10℃ FOR
WETTING ON SOLDER SURFACE,NO SOLDER CLUSTER.
X
-
SOLDERING DURATION, 2 TO 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
EJ.KUNII
EJ.KUNII
15.09.29
15.09.29
15.09.29
15.09.29
NOTE(1) R/T:ROOM TEMPERATURE
TP.KOMATSU
TP.KOMATSU
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-041594-73-73
HR10A-10PD-12S(73)
CL110-0449-3-73
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
FORM HD0011-2-1