HPQ-8.3/22-D48 Series
Isolated 22-Amp Quarter Brick DC-DC Converters
www.murata-ps.com
PRODUCT OVERVIEW
The HPQ-8.3/22-D48 series offers high output
current (up to 22 Amps) in an industry standard
“quarter brick” package requiring no heat sink for
most applications. The HPQ-8.3/22-D48 series de-
livers fixed 8.3 Vdc output at 183 Watts for printed
circuit board mounting. Wide range inputs on the
2.3" x 1.45" x 0.4" converter are 36 to 75 Volts DC
(48 Volts nominal), ideal for datacom and telecom
systems. The fixed output voltage is regulated to
within 0.25ꢀ.
Advanced automated surface mount assembly
and planar magnetics deliver galvanic isolation
rated at 2250 Vdc for basic insulation. To power
digital systems, the outputs offer fast settling to
current steps and tolerance of higher capacitive
loads. Excellent ripple and noise specifications as-
sure compatibility to CPU’s, ASIC’s, programmable
logic and FPGA’s. No minimum load is required. For
systems needing controlled startup/shutdown, an
external remote On/Off control may use either posi-
tive or negative polarity. Remote Sense inputs com-
pensate for resistive line drops at high currents.
A wealth of self-protection features avoid prob-
lems with both the converter and external circuits.
These include input undervoltage lockout and
overtemperature shutdown using an on-board tem-
perature sensor. Overcurrent protection using the
“hiccup” autorestart technique provides indefinite
short-circuit protection. Additional safety features
include output overvoltage protection and reverse
conduction elimination. The synchronous rectifier to-
pology offers high efficiency for minimal heat buildup
and “no heat sink” operation. The HPQ-8.3/22-D48
series is certified to UL safety standards (pending)
and RFI/EMI conducted/radiated emission compliance
to EN55022, CISPR22 with external filter.
Typical unit
FEATURES
ꢀ
8.3 Volts DC fixed output up to 22 Amps
ꢀ
Industry standard quarter brick 2.3" x 1.45" x
0.4" open frame package
ꢀ
Wide range 36 to 75 Vdc input voltages with
2250 Volt Basic isolation
ꢀ
Double lead-free assembly and attachment for
RoHS standards
ꢀ
Up to 183 Watts total output power
ꢀ
High efficiency (92.5ꢀ) synchronous rectifier
topology
ꢀ
Stable no-load operation with no required external
components
APPLICATIONS
ꢀ
ꢀ
Instrumentation systems, R&D platforms, auto-
mated test fixtures
Embedded systems, datacom and telecom
ꢀ
Operating temperature range -40 to +85° C.
with no heat sink required
installations
ꢀ
ꢀ
Disk farms, data centers and cellular repeater sites
Data concentrators, voice forwarding and
speech processing systems
ꢀ
Certified to UL/EN 60950-1, CSA-C22.2 No.
60950-1, 2nd edition safety approvals
(certification is pending)
ꢀ
Remote sensor systems, dedicated ntrollers
ꢀ
Extensive self-protection, current limiting and
shut down features
ꢀ
“X” optional version omits sense pins
Isolation
F1
+Vin (1)
+Vout (8)
Barrier
• Switching
• Filters
+Sense (7)*
External
DC
Power
Source
On/Off
Control
(2)
Controller
and Power
Transfer
• Current Sense
-Sense (5)*
Trim (6)*
Open = On
Closed = Off
(Positive
logic)
Reference and
Error Amplifier
-Vin (3)
-Vout (4)
Figure 1. Connection Diagram
Typical topology is shown. Murata Power Solutions
recommends an external fuse.
* “X” option omits sense pins.
For full details go to
www.murata-ps.com/rohs
(certification is pending)
www.murata-ps.com/support
MDC_HPQ-8.3-22-D48 Series.C01 Page 1 of 14