HFD7000-212

更新时间： 2024-01-26 22:52:56

品牌	Logo	应用领域
霍尼韦尔 - HONEYWELL		光纤放大器局域网
页数	文件大小	规格书
4页	366K
描述
Designed to meet industrial LAN (Local Area Network) specificatons

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

HFD7000-212 技术参数

生命周期：	Obsolete	包装说明：	TO-18
Reach Compliance Code：	unknown	风险等级：	5.6
主体宽度：	12.5 mm	主体高度：	9.6 mm
主体长度或直径：	20.2 mm	内置特性：	AMPLIFIER
连接类型：	SMA CONNECTOR	数据速率：	16 Mbps
发射极/检测器类型：	PIN PHOTODIODE	光纤设备类型：	RECEIVER
光纤类型：	POF	安装特点：	THROUGH HOLE MOUNT
最高工作温度：	70 °C	最低工作温度：
标称工作波长：	660 nm	封装形式：	TO-18
灵敏度：	-21 dBm	最大供电电压：	5.25 V
最小供电电压：	4.75 V	标称供电电压：	5 V
表面贴装：	NO	Base Number Matches：	1

HFD7000-212 数据手册

Fiber Optic Components

High-speed TTL Receiver

HFD7000-2XX Series

FEATURES

• Designed to meet industrial

LAN (Local Area Network)

specifications

• Converts optical input into

an electrical signal

• Typical sensitivity at

660 nm is -21 dBm

• Single 5 V supply

• High-speed (dc to

16 Mbps)

• Metal SMA barrel for high

mechanical stability

• Separate grounding of the

barrel provides excellent

The HFD7000 Series are high-speed optical receivers designed for data

transmission in industrial LAN applications. The monolithic CMOS chip

consists of a large area photodiode, pre-amplifier with controlled gain, a post

amplifier, a comparator and TTL output stage. The integrated voltage

regulator provides easy use in many applications.

The chip’s silicon material is optimized for 660 nm operation The on-chip

controlled gain provides a wide dyanmic range and low pulse width distortion

(PWD).

RFII/EMI/ESD shielding

• Low-cost plastic version

(HFD7000-212) available

• PIN-compatible with

Honeywell’s HFD3403 5

Mbps receiver

The chip is mounted in a metal TO-18 package. In addition, the outer

package of the HFD7000-202 has a metal barrel for high mechanical stability

and excellent shielding against RFI/EMI and ESD. This feature allows the

receiver to operate in harsh environments.

The receiver is designed to work with Honeywell’s high-speed 660 nm

transmitter, the HFE 7000.

For maximum performance of this receiver, a 0.1 µF capacitor must be

mounted between Vcc and ground no more than 3,0 mm [0.12 in] away from

the housing. A 4.7 Ω resistor in series with Vcc increases the filter’s

performance. This minimizes external noise and allows the maximum

sensitivity to be maintained.

WARNING

PERSONAL INJURY

DO NOT USE these

products as safety or

emergency stop devices, or

in any other application

where failure of the product

could result in personal

injury.

Failure to comply with

these instructions could

result in death or serious

injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for reference only. Do

not use this document as a product installation guide.

• Complete installation, operation, and maintenance information is

provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or

serious injury.

Sensing and Control

12 3 4

下载PDF

与HFD7000-212相关器件

型号	品牌	描述	获取价格	数据表
HFD7000-215	HONEYWELL	Designed to meet industrial LAN (Local Area Network) specificatons	获取价格
HFD7180-001	FINISAR	5 pin LC ROSA, with separate PD bias	获取价格
HFD7180-413	FINISAR	5 pin LC ROSA, with separate PD bias	获取价格
HFD7500-212	ETC	Optoelectronic	获取价格
HFD7500-215	ETC	Optoelectronic	获取价格
HFD7510-212	HONEYWELL	Receiver, 50Mbps, SMA Connector, Through Hole Mount, PLASTIC PACKAGE-4	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

HFD7000-212

HFD7000-212 技术参数

HFD7000-212 数据手册

与HFD7000-212相关器件

与HFD7000-212相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

HFD7000-212

HFD7000-212 技术参数

HFD7000-212 数据手册

与HFD7000-212相关器件

与HFD7000-212相关文章

您还可以找

您在本页遇到什么问题？