Applicable standard
Operating
Storage
Temperature range
Storage
-55 C to +85C (Note1)
-10 C to +60C
Temperature range
Operating
Humidity range
40% to 80% (Note2)
40% to 70%
Humidity range
Applicable
Connector
HNC1-2.5S-*
HNC2-2.5S-*
Rating
Voltage
250V AC
22 AWG to 24 AWG : 3A
26 AWG : 2A
Applicable wire
Current
22AWG to 26AWG
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
10 m MAX.
Contact resistance
20mV MAX, 1mA (DC or 1000Hz).
-
X
Mechanical characteristics
Contact insertion and
extraction forces
□0.635±0.002 mm by steel gauge.
Insertion force: 4.9N MAX.
Extraction force: 0.4N MIN.
-
-
-
-
X
X
X
X
50 times insertion and extraction.
①Contact resistance: 20 mΩ MAX.
Mechanical operation
②No damage, crack or looseness of parts.
①No electrical discontinuity of 10μs.
②No damage, crack or looseness of parts.
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
490 m/s2 duration of pulse 11 ms at 3 times each for
3 both axial directions.
Vibration
Shock
Environmental characteristics
Damp heat
Exposed at 40±2℃ , 90 to 95 %, 96 h.
①Contact resistance: 10 mΩ MAX.
-
-
X
X
(Steady state)
(After leaving the room temperature for 1-2h.)
②No damage, crack or looseness of parts.
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2-3 min)
(After leaving the room temperature for 1-2h.)
Exposed in 5% salt water spray for 48h.
Corrosion, salt mist
No heavy corrosion.
-
X
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note 3: Apply to the condition of long term storage for unused products before mounted on PCB. After mounted on PCB, operating temperature
and humidity range is applied for interim storage during transportation.
Count
Description of revisions
Designed
Checked
Date
0
△
Remarks
Approved
Checked
Designed
Drawn
HS.OKAWA
20190417
20190417
20190417
20190417
SZ.ONO
HK.HAYASHI
SK.CHIBA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC-008108-02-00
HNC-2.5S-D-A(02)
Part No.
Specification sheet
HIROSE ELECTRIC CO., LTD.
0
△
1/1
Code No.
CL218-0037-5-02
FORM HD0011-2-1