Applicable standard
Operating
Storage
Temperature range
Storage
-55 C to +85C (Note1)
-10 C to +60C (Note3)
Temperature range
Operating
Humidity range
20% to 80% (Note2)
40% to 70% (Note3)
Humidity range
Applicable
Connector
HNC1-2.5S-*
HNC2-2.5S-*
Rating
Voltage
Current
250V AC/DC
26 AWG : 2A/pin
28 AWG : 1A/pin
30 AWG : 0.5A/pin
Applicable wire
26AWG to 30AWG
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
10 m MAX.
Contact resistance
20mV MAX, 1mA (DC or 1000Hz).
-
X
Mechanical characteristics
Contact insertion and
extraction forces
□0.635±0.002 mm by steel gauge.
Insertion force: 4.9N MAX.
Extraction force: 0.4N MIN.
-
-
-
-
X
X
X
X
50 times insertion and extraction.
1)Contact resistance: 20 mΩ MAX.
Mechanical operation
2)No damage, crack or looseness of parts.
1)No electrical discontinuity of 10μs.
2)No damage, crack or looseness of parts.
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
490 m/s2 duration of pulse 11 ms at 3 times each for
3 both axial directions.
Vibration
Shock
Environmental characteristics
Damp heat
Exposed at 40±2℃ , 90 to 95 %, 96 h.
1)Contact resistance: 10 mΩ MAX.
-
-
X
X
(Steady state)
(After leaving the room temperature for 1-2h.)
2)No damage, crack or looseness of parts.
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2-3 min)
(After leaving the room temperature for 1-2h.)
Exposed in 5% salt water spray for 48h.
Corrosion, salt mist
No heavy corrosion.
-
X
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note 3: Apply to unused product on packaged condition.
Count
Description of revisions
Designed
TS.KUMAZAWA
Checked
Date
1
△
1
DIS-H-00009479
SZ.ONO
20210528
20050105
20050105
20050105
20050105
1
Format change
Approved
Checked
Designed
Drawn
KJ.KATAYOSE
TY.OMA
△
TS.KUMAZAWA
TS.KUMAZAWA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC4-007783-01
Part No.
HNC-2.5S-C-B(01)
Specification sheet
HIROSE ELECTRIC CO., LTD.
1
△
1/1
Code No.
CL0218-0020-2-01
FORM HD0011-2-1