HMC685LP4 / 685LP4E
v03.0409
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Typical Applications
The HMC685LP4(E) is Ideal for:
Features
High Input IP3: +35 dBm
• Cellular/3G & LTE/WiMAX/4G
• Basestations & Repeaters
• GSM, CDMA & OFDM
8 dB Conversion Loss @ 0 dBm LO
Optimized for Low Side LO Input
8
Upconversion & Downconversion Applications
Adjustable Supply Current
• Transmitters and Receivers
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
The HMC685LP4(E) is a high dynamic range passive
MMIC mixer with integrated LO amplifier in a 4x4 SMT
QFN package covering 1.7 to 2.2 GHz. Excellent input
IP3 performance of +35 dBm for down conversion is
provided for 3G & 4G GSM/CDMA applications at an
LO drive of 0 dBm. With an input 1 dB compression
of +27 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 8 dB typical.
The DC to 500 MHz IF frequency response will sat-
isfy GSM/CDMA transmit or receive frequency plans.
The HMC685LP4(E) is pin for pin compatible with the
HMC684LP4(E) which is a 700 - 1000 MHz mixer with
LO amplifier.
Electrical Specifications,
TA = +25° C, IF = 200 MHz, LO = 0 dBm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
Icc = 120 mA
Typ.
Icc = 90 mA
Typ.
Icc = 70 mA
Typ.
Nominal Supply
Parameter
Units
Min.
Max.
Frequency Range, RF
1.7 - 2.2
1.5 - 2.2
DC - 500
10
GHz
GHz
MHz
dB
Frequency Range, LO
Frequency Range, IF
Conversion Loss
8
8
8
8
8
8
Noise Figure (SSB)
LO to RF Isolation
dB
22
24
30
30
33
34
dB
LO to IF Isolation
30
31
32
dB
RF to IF Isolation
42
42
43
dB
IP3 (Input)
35
34
32
dBm
dBm
dBm
mA
1 dB Compression (Input)
LO Drive Input Level (Typical)
Supply Current Icc total
25
24
23
-6 to +3
120
-6 to +3
90
-6 to +3
70
140
* Unless otherwise noted all measurements performed as downconverter with low side LO & IF = 200 MHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 242