Datasheet > HLY-3051

HLY-3051

更新时间： 2024-10-31 22:30:51

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
4页	50K
描述
Series II HLY-3051 VOLTMETER Introduction

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

HLY-3051 数据手册

Series II

HLY-3051 VOLTMETER

Introduction:

The Odyssey Series II gauges from Dakota Digital, Inc. incorporates the reliability and

quality of our standard gauges, along with several unique features and easy mounting. These

features include:

Industry standard 2-1/16” gauge size.

Weather-proof construction.

A warning feature that flashes the gauge readout when outside operating limits.

User adjustable warning points.

Microprocessor stabilized readings.

Quick-Start feature to provide accurate readings quickly after being powered up.

Night dimming with lens label lighting.

Non-Glare, high contrast lens.

High Visibility VFD display for sunlight readability.

Operation:

The PWR terminal should be connected to a 12 volt accessory feed. The case provides

the gauge ground. Connect a ground wire to the screw at the bottom rear of the case. When the

DIM terminal has 12 volts, it will dim the display for night viewing. The SND terminal is the

voltage sensing input. To read the vehicle system voltage, connect this to the PWR terminal.

To read the voltage at a second battery or other remote location, connect a wire from the SND

terminal to the voltage to be monitored.

The voltage gauge will operate in the voltage range of 8.0 – 17.0 and read correct

between the voltage range of 1.0 - 18.0 volts. It has a user adjustable lower and upper warning

level. This can be set to indicate low voltage and overcharging conditions.

Setting the warning limits:

The SND terminal is used to enter and change the warning settings. You will need a

wire connected to the SND terminal that can be powered separate from the gauge.

1. To enter the set mode, turn the key on with the SND wire not powered. The gauge will

display “SEt”.

2. Power the SND wire. The gauge will display “ HI”. (If you wait too long the gauge will

exit the setup routine and you will need to repeat step #1).

3. Release the SND wire. The gauge will display a number between 13.9 and 16.9.

4. Each time you momentarily power the SND wire the number will increase by one.

5. When the desired high warning value is displayed, keep the SND wire powered for about

2 seconds. The gauge will display “ LO”.

6. Release the SND wire. The gauge will display a number between 9.7 and 12.6.

7. Each time you momentarily power the SND wire the number will increase by one.

8. When the desired low warning value is displayed, keep the SND wire powered for about

2 seconds. The gauge will display “--”.

9. Turn the key off.

12 3 4

中文翻译

下载PDF

与HLY-3051相关器件

型号	品牌	获取价格	描述	数据表
HLZ03306ZR3900KJ	VISHAY	获取价格	RESISTOR, WIRE WOUND, 35 W, 10 %, 90 ppm, 0.39 ohm, CHASSIS MOUNT
HLZ03315ZR1500JJ	VISHAY	获取价格	RESISTOR, WIRE WOUND, 35 W, 5 %, 90 ppm, 0.15 ohm, CHASSIS MOUNT
HLZ03315ZR4700JJ	VISHAY	获取价格	RESISTOR, WIRE WOUND, 35 W, 5 %, 90 ppm, 0.47 ohm, CHASSIS MOUNT
HLZ09007E4R700KE	VISHAY	获取价格	RESISTOR, WIRE WOUND, 90 W, 10 %, 50 ppm, 4.7 ohm, CHASSIS MOUNT, GREEN
HLZ09007Z1R000KJ	VISHAY	获取价格	RESISTOR, WIRE WOUND, 90 W, 10 %, 50 ppm, 1 ohm, CHASSIS MOUNT
HLZ105	VISHAY	获取价格	RESISTOR, WIRE WOUND, 105 W, 5; 10 %, 30; 50; 90 ppm, 0.2 ohm - 7.4 ohm, CHASSIS MOUNT, GR
HLZ10507E1R500KE	VISHAY	获取价格	RESISTOR, WIRE WOUND, 105 W, 10 %, 50 ppm, 1.5 ohm, CHASSIS MOUNT, GREEN
HLZ10507E1R800KE	VISHAY	获取价格	RESISTOR, WIRE WOUND, 105 W, 10 %, 50 ppm, 1.8 ohm, CHASSIS MOUNT, GREEN
HLZ10507E2R700KE	VISHAY	获取价格	RESISTOR, WIRE WOUND, 105 W, 10 %, 50 ppm, 2.7 ohm, CHASSIS MOUNT, GREEN
HLZ10507E3R900KE	VISHAY	获取价格	RESISTOR, WIRE WOUND, 105 W, 10 %, 50 ppm, 3.9 ohm, CHASSIS MOUNT, GREEN

与HLY-3051相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

4
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

2
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

23
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

24

产品中心

服务支持

精选活动

关于我们

帮助中心

HLY-3051

HLY-3051 数据手册

与HLY-3051相关器件

与HLY-3051相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

HLY-3051

HLY-3051 数据手册

与HLY-3051相关器件

与HLY-3051相关文章

您还可以找

您在本页遇到什么问题？