HIP6015
Data Sheet
March 2000
File Number 4421.2
Buck Pulse-Width Modulator (PWM)
Controller and Output Voltage Monitor
Features
• Drives N-Channel MOSFET
The HIP6015 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6015 integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
• Operates from +5V or +12V Input
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
The output voltage of the converter is easily adjusted and
precisely regulated. The HIP6015 includes a fully
TTL-compatible 5-input digital-to-analog converter (DAC)
• Excellent Output Voltage Regulation
- ±1% Over Line Voltage and Temperature
that adjusts the output voltage from 2.1V
to 3.5V
in
in 0.05V
DC
DC
• TTL-Compatible 5-Bit Digital-to-Analog Output Voltage
Selection
0.1V increments and from 1.8V
to 2.05V
DC
DC
steps. The precision reference and voltage-mode regulator
hold the selected output voltage to within ±1% over
temperature and line voltage variations.
- Wide Range . . . . . . . . . . . . . . . . . . . 1.8V
- 0.1V Binary Steps. . . . . . . . . . . . . . . 2.1V
to 3.5V
to 3.5V
DC
DC
DC
DC
DC
- 0.05V Binary Steps. . . . . . . . . . . . . 1.8V
to 2.05V
DC
The HIP6015 provides simple, single feedback loop,
voltage-mode control with fast transient response. It
includes a 200kHz free-running triangle-wave oscillator that
is adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
• Power-Good Output Voltage Monitor
• Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element,
Uses MOSFET’s r
DS(ON)
• Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to over 1MHz
The HIP6015 monitors the output voltage with a window
comparator that tracks the DAC output and issues a Power
Good signal when the output is within ±10%. The HIP6015
protects against over-current and over-voltage conditions by
inhibiting PWM operation. Additional built-in over-voltage
protection triggers an external SCR to crowbar the input
supply. The HIP6015 monitors the current by using the
Applications
• Power Supply for Pentium®, Pentium Pro, Pentium II,
PowerPC™, K6™, 6X86™ and Alpha™ Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
•
•
r
of the upper MOSFET which eliminates the need for
DS(ON)
a current sensing resistor.
Ordering Information
Pinout
HIP6015
(SOIC)
TOP VIEW
TEMP.
PKG.
NO.
o
PART NUMBER RANGE ( C)
PACKAGE
20 Ld SOIC
HIP6015CB
0 to 70
M20.3
1
2
3
4
5
6
7
8
9
R
T
V
20
19
SEN
OCSET
SS
OVP
18 V
CC
VID0
VID1
VID2
VID3
VID4
COMP
17 NC
16 NC
15 BOOT
14 UGATE
13 PHASE
6X86™ is a trademark of Cyrix Corporation.
Alpha™ is a trademark of Digital Equipment Corporation.
K6™ is a trademark of Advanced Micro Devices, Inc.
Pentium® is a registered trademark of Intel Corporation.
PowerPC™ is a trademark of IBM.
12
PGOOD
FB 10
11 GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000
1