APPLICABLE STANDARD
OPERATING
STORAGE
-10 C TO 60 C (2)
40 % TO 80 %
-55 C TO 85 C(1)
125 V AC
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
RATING VOLTAGE
CURRENT
STORAGE HUMIDITY
RANGE
40 % TO 70 % (2)
0.5A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL
METHOD
100 mA (DC or 1000 Hz).
30 mΩ MAX .
30 mΩ MAX .
×
×
-
-
20 mV MAX,
1
mA(DC OR 1000Hz)
INSULATION
RESISTANCE
250 V DC.
1000 MΩ MIN.
×
×
-
-
VOLTAGE PROOF
300 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE:
EXTRACTION FORCE:
2.9 N MAX.
0.3 N MIN.
□0.5±0.002 BY STEEL GAUGE.
×
×
-
-
EXTRACTION FORCES
MECHANICAL
OPERATION
500 TIMES INSERTIONS AND EXTRACTIONS.
①CONTACT RESISTANCE: 30 m MAX.
②NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz,
AMPLITUDE : 1.5 mm,
AT 2 h FOR 3 DIRECTION.
①NO ELECTRICAL DISCONTINUITY OF
1 s.
②NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
490 m/s2 , DURATION OF PULSE 11 ms
AT
3
TIMES FOR
3
DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT
40±2 C, 90 ~ 95 %, 96 h. ①CONTACT RESISTANCE: 30 m MAX.
×
×
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
②INSULATION RESISTANCE:1000 M MIN.
③NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
TEMPERATURE-65→+15~+35→+125→+15~+35C
TIME
UNDER
30 → MAX 5 → 30 → MAX 5 min
CYCLES.
5
CORROSION SALT MIST EXPOSED IN
48 h.
5
% SALT WATER SPRAY FOR
①CONTACT RESISTANCE: 30 m MAX.
②NO HEAVY CORROSION.
×
×
×
×
×
-
-
-
-
-
HYDROGEN SULPHIDE EXPOSED IN
3
PPM FOR 120 h.
(TEST STANDARD:JEIDA 38)
RESISTANCE TO
SOLDERING HEAT
1) SOLDER BATH:SOLDER TEMPERATURE,
260±5℃ FOR IMMERSION,DURATION,10±1s.
2) SOLDERING IRONS : 360℃ FOR 5 s MAX.
NO DEFORMATION OF CASE OF
EXCESSIVE LOOSENESS OF THE
TERMINALS.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
245±3C, FOR IMMERSION DURATION,
2 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) TEMPERATURE RISE INCLUDED WHEN ENERGIZED.
(2) THIS STORAGE INDICATES A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE THE BOARD MOUNTED.
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HT.YAMAGUCHI
HT.YAMAGUCHI
HR.NAGAYASU
TS.HORI
18.06.25
18.06.25
18.06.25
18.06.25
Unless otherwise specified, refer to MIL-STD-1344.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-383735-00-00
HIF6A-**DA-1.27DS(71)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
FORM HD0011-2-1