APPLICABLE STANDARD
OPERATING
STORAGE
-10 C TO 60 C (2)
-55 C TO 85 C(1)
200 V AC
1 A
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
RATING VOLTAGE
CURRENT
STORAGE HUMIDITY
RANGE
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA (DC or 1000 Hz).
15 mΩ MAX .
1000 MΩ MIN.
×
×
-
-
INSULATION RESISTANCE
500 V DC.
VOLTAGE PROOF
650 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
×
-
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
EXTRACTION FORCES
INSERTION FORCE:
EXTRACTION FORCE: 0.39 N MIN
3.43 N MAX
□0.635±0.002mm BY STEEL GAUGE
×
×
-
-
MECHANICAL OPERATION 500 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 15 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10Hz, APPROX 5min
SINGLE AMPLITUDE : 0.75 mm, 10CYCLES
FOR 3 AXIAL DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② NO DAMAGE, CRACK AND LOOSENESS
×
×
-
-
490 m/s2, DURATION OF PULSE 11 ms
OF PARTS.
AT 3 TIMES FOR 3 BOTH AXIAL DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40±2 C, 90 ~ 95 %, 96 h.
① CONTACT RESISTANCE: 15 m MAX.
② INSULATION RESISTANCE:1000 M
MIN.
×
×
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55 → +125 C
TIME
30 → 30 min
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
UNDER 5 CYCLES.
(RELOCATION TIME TO CHANBER:WITHIN2~3MIN)
DRY HEAT
COLD
EXPOSED AT 85℃, 96h
① CONTACT RESISTANCE: 15 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
EXPOSED AT -55℃, 96h
SULFUR DIOXIDE
EXPOSED AT 25±2℃, 75±5%RH, 25PPM FOR ① CONTACT RESISTANCE: 15 m MAX.
×
×
-
-
96 h.(TEST STANDARD :JIS C 60068)
② NO HEAVY CORROSION.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR
48 h.
NO HEAVY CORROSION
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) TEMPERATURE RISE INCLUDED WHEN ENERGIZED.
(2) THIS STORAGE INDICATES A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE THE BOARD MOUNTED.
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HT.YAMAGUCHI
HT.YAMAGUCHI
MT.ITANO
20181211
20181211
20181211
20181207
Unless otherwise specified, refer to IEC 60512.
TS.HORI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-386209-00-00
HIF3M*W-*D-2.54R(63)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
FORM HD0011-2-1