Low Profile Option for 1x9
Transceivers
Technical Data
Option P
Features
Description
• PMC (PCI Mezzanine Card)
Compliant Packaging Style
with 9.8 mm Height
• Full Compliance with the
Optical Performance
Requirements of the FDDI
PMD Standard and ATM
Forum UNI SONET OC-3
Multimode Fiber Physical
Layer Specification
• Multisourced 1x9 Package
Style with Duplex SC
Connector
The low-profile option of the 1x9
transceivers gives the designers a
PMC compliant package option
with the performance of the
standard 1x9 modules. The
option P products have the same
electrical and optical
performances as the standard
products.
Package
Ordering Information
The package outline drawing is
shown on the reverse page. The
pin-outs are the same as the
original 1x9 package style.
This option will be available with
the following part numbers in SC
connector style only. The
standard product part numbers
for the following are the same
part numbers without the “P”
suffix.
• Wave Solder and Aqueous
Wash Process Compatible
• Manufactured in an ISO
9001 Certified Facility
Regulatory Compliance
These transceiver products
enable commercial system
Applications
designers to develop equipment
that complies with the various
international regulations which
govern the certification of Infor-
mation Technology Equipment.
The transceivers typically provide
a 10 dB margin to the FCC Class
B standard for Electromagnetic
Interference when tested at a
certified test range without a
chassis enclosure. Additional
information is available from the
data sheets of the standard
products or your Agilent sales
representative.
• HFBR-5103P – FDDI/Fast
Ethernet/ATM 100 Mbps
Concentrators, Bridges,
Routers, and Network
Interface Cards
• HFBR-5204P/5205P –
Multimode Fiber ATM
Backbone Links and Wiring
Closet to Desktop Links
Part Number Baud/Distance
HFBR-5103P 125 MBd/2 km
HFBR-5204P 155 MBd/500 m
HFBR-5205P 155 MBd/2 km
Reliability Information
The low-profile option modules
use the same semiconductor
devices and manufacturing
processes as the standard 1x9
transceivers. Therefore, the
reliability data for the standard
parts is directly applicable.